Results 1 to 4 of 4

Thread: Okay, I have asked this before but ....

  1. #1
    Join Date
    Apr 2008
    Location
    ireland
    --
    57

    Okay, I have asked this before but ....

    I am still having problems with the 225drs,

    whenever I throttle it fast it will not take it and begins to chug as if it is flooding itself.

    I have had it serviced, new plug, new exhaust, new carb kit fitted and carb cleaned, new air filter.

    It idles okay and is fine from about 25% throttle to 100% throttle full open but not at the first 25%, have to rev it gently to get it above this level.

    Any ideas???

  2. #2
    Join Date
    Jan 2005
    Location
    RI
    --
    2,530
    if it stumbles when punching it off idle i would say you need to adjust your air/fuel screw...check the jetting sticky on details
    1986 Tri-z
    1985 250r
    1985 200s
    1985 70[/SIZE]

  3. #3
    Join Date
    Apr 2008
    Location
    ireland
    --
    57
    Quote Originally Posted by DeePa View Post
    if it stumbles when punching it off idle i would say you need to adjust your air/fuel screw...check the jetting sticky on details
    Sorry meant to include that, the air/fuel screw has been checked a ton of times now. still no joy.

  4. #4
    Join Date
    Jan 2009
    Location
    pa
    --
    137
    i dont really know much about your machine. forgive me if im way off but i would like to help if possible. i have a 70 and it did the same thing. i fixed it by adjusting the timing. if yours is a points machine try that. let me know the outcome?

//ArrowChat Integreation Code //