Results 1 to 7 of 7

Thread: Yamaha 1985 ytm200e

  1. #1
    Join Date
    Feb 2009
    Location
    Wisconsin
    --
    521

    Yamaha 1985 ytm200e

    Is there a link to a owners manual for this trike.

    I am also having some problems with the electric start. I charged the battery and all I get is an click.

  2. #2
    Join Date
    May 2007
    Location
    PA
    --
    908
    Here is the link to the manual. Click on the name of your trike.
    http://72.52.143.80/~trikes/

    As for the battery, it sounds like its not strong enough.


    All things 3 wheel

  3. #3
    Join Date
    Feb 2009
    Location
    Wisconsin
    --
    521
    Quote Originally Posted by 225DX DUDE View Post
    Here is the link to the manual. Click on the name of your trike.
    http://72.52.143.80/~trikes/

    As for the battery, it sounds like its not strong enough.
    Thanks for the manual.

    I charged it all last night, I tired a jump pack on it today, and I still get a click.

    Is there a way I can jump the starter and see if the starter works.

  4. #4
    Join Date
    Feb 2009
    Location
    Wisconsin
    --
    521
    Well I'm getting over 12 volts at the starter, So I assume its a bad starter?

  5. #5
    Join Date
    May 2008
    Location
    Tenn
    --
    548

    Starter? Maybe relay

    It may not be the starter, but the starter relay.
    You could try to jump start it with cables. Hook them up to an auto and place hot on starter bolt where the wire connects to it then ground the other end. If it turns over it's probably not the starter.

    sheeptender

    Just TRI It
    Just-Tri-It

    :Trikes Owned:
    1985 Tri-z's 3
    1986 Tri-z
    1984 YTM 200ERN 1

  6. #6
    Join Date
    Feb 2009
    Location
    Wisconsin
    --
    521
    Ok, I tried jumping it, Did the same thing just a click. So I took my screw driver handle and wacked the starter and got a little whine out of it. I tried to take it out but I couldnt figure how it comes out after the 4 screws.

    Im guessing I need another starter.

  7. #7
    Join Date
    Feb 2009
    Location
    Wisconsin
    --
    521
    Pulled it apart and its basiclly shot. It needs brushes, Im going to try a set of the aftermarket ones http://cgi.ebay.com/ebaymotors/ATV-S...7464QQtcZphoto

//ArrowChat Integreation Code //