My 84 250r as of now

**saleen_n_around** · 03-11-2009, 10:50 PM

I have a spare bottom end, but can't get my hands on it until this weekend.......build me a list of what you need engine parts wise and I'll get it together and send pics on Saturday....

**aaron7** · 03-12-2009, 07:53 AM

Think I just need the crank. I ordered everything else long as my jug is OK!

**jeffatc250r** · 03-14-2009, 09:58 AM

I will look into the crank bearings for you. I dropped the cylinder off on thurs, he will call me sometime early this week to let me know how it turns out. For some reason i thought the crank bearings were the same as the water pumper R's, but im not sure now. Ill do some measuring later today.

**aaron7** · 03-14-2009, 02:53 PM

Awesome, let me know what the machinist says so I can order the piston set.

If the crank bearings ARE the same as the 85+ that would be great as then I can get All Balls and not super-China brand.

**aaron7** · 03-16-2009, 05:43 PM

Ok, .060 over Wiseco set on its way. Oil seals, gasket set, and HR rod kit all here now.

Jeff, shoot me a PM with what the machine work and your labor is going to cost. Hope it isn't TOO bad, I hope to be able to get my money back out of this thing someday! haha

**aaron7** · 03-21-2009, 07:00 PM

Wiseco came in today. Just need the crank bearings and a crank and we're in business.

**saleen_n_around** · 03-21-2009, 11:58 PM

I should have a crank for you tomorrow.....

**aaron7** · 03-22-2009, 10:09 AM

^Cool, let me know!

Jeff, do you see anything inside that would explain why the kick only caught half the time?

**jeffatc250r** · 03-22-2009, 12:25 PM

Aaron, the kicker slipping is a simple fix, i will look more into that, cool on the crank and other parts. Ill call you tonight to discuss everything.

**saleen_n_around** · 03-23-2009, 12:31 PM

I don't have time to split the cases, I'll send you the whole thing for $40 + shipping, that will give you spare cases too....

**aaron7** · 03-23-2009, 01:01 PM

Long as you know the crank is good, I'll bite. let me know what shipping will be to 01469

**aaron7** · 03-25-2009, 06:04 PM

xxxxxxxxxx

**aaron7** · 04-18-2009, 10:03 AM

xxxxxxxxxxxxx

**aaron7** · 05-14-2009, 03:34 PM

Well, Jeff has finished up the trike. Starts first kick and runs awesome! (so I've heard, yet to pick it up!)

New motor, functional brakes (except the front, need a new master cyl)... totally rideable!

He couldn't install my new bearing carrier as my swingarm is all cracked and rewelded. I need to find a new swingarm!

Couldn't use my new chain yet either as my rear sprocket is all hooked. Just ordered a NOS Honda one from ebay.

Pics and a vid to follow!

Thread: My 84 250r as of now

Thread Tools