70 with lifan 110 or 125 ?

**ScottZJ** · 03-20-2009, 09:12 AM

Well I extended my frame 3" for a larger adult to ride better LOL. So I shouldnt have any rubbing problems hehe. But I do see where the motor is a tad longer there.

**CRAZY70MAN** · 03-20-2009, 08:35 PM

You can leave stock fender if you advance kickstart forward on shaft and machine or grind down the already too thick kickstart to clear side case. Here is a pic of mine. It is a KRP 90cc not a Lifan but it hauls arss and is on my swamplady weekend ripper

Maybe give ya' some ideas for the fender? Good luck..

**The Goat** · 03-21-2009, 01:17 AM

does anyone have one of these in a trx?

**Autophysn** · 03-21-2009, 03:22 AM

Originally Posted by The Goat

just wanted to advise watching out for the lifan knockoffs...I can't remember which one it was, but someone kicked a sidecase and broke it the metal was so poor.

Word! Be sure to get a proper Lifan or Loncin and you will be fine

**DustyW** · 03-22-2009, 08:46 AM

Well I found a "lifan". The guy says its a lifan, but it doesn't say it on the engine or box. He is going to check to see if the starter is on the top or bottom of engine. Will it work with the starter on the top? Its a 110cc electric start 4 speed semi automatic. He wants $250, its complete with carb.Brand new in the box. I think thats a good deal, but I am worried about the no lifan thing. Maybe I shouldn't care.

**dizasterzrfun69** · 03-22-2009, 08:18 PM

Originally Posted by DustyW

Well I found a "lifan". The guy says its a lifan, but it doesn't say it on the engine or box. He is going to check to see if the starter is on the top or bottom of engine. Will it work with the starter on the top? Its a 110cc electric start 4 speed semi automatic. He wants $250, its complete with carb.Brand new in the box. I think thats a good deal, but I am worried about the no lifan thing. Maybe I shouldn't care.

i started building a 70 for my girlfriend with a 110 motor out of a kazuma quad. It had the starter on top and it poses a problem. You'll need to find some kind of intake/carb/airfilter combo that'll work. i couldnt find anything but i also dont have money to be buying different intakes to try and then have them not work. it's totally up to you but i'd get a kickstart and then do the pullstart conversion like i did on my other project.

**DustyW** · 03-22-2009, 08:47 PM

I got this 110 spotted, but the guy says it doesn't say lifan anywere on it, it doesn't say anything. If you look at the pic of the shift pattern, I can't tell if its a rotary shift or not. I don't think I would like that very well. I think I am going to go with it anyway, seems like a good deal. If anybody sees anything in the pic that doesnt look good, let me know. Thanks for all the replies.

Thread: 70 with lifan 110 or 125 ?

Thread Tools

.