can anyone show me any pictures of where they have attached their license plates to the trike, i dont want to make any new holes and cant really find a good spot to hang it any help would be great thanks
New to the board
Arm chair racerNew to the board
CAUTION I RIDE ON 3 WHEELS
Power User
Roostin Away
the grab bar or frame is usually where most people attach them, just using zip ties usually.
1986 200x- old school D.I.D wheels, Gold D.I.D X-Ring Chain, Rad MFG. Carrier, PRM Grab Bar, Pro Circuit T-4 custom, Maier plastics, 85x forks, 18x10.5x8 kenda klaw mxr's on itp steels, the money pit never ends
2004 YFZ450 - CP 12.5:1, cam mod , gibson nerfs, hmf pipe, protaper bars + risers, dg bumper/skids, holeshot gncc's on itps, cycra handguard and more stuff to come.
New to the board
Arm chair racerNew to the board
on the back of the frame will block the taillight
CAUTION I RIDE ON 3 WHEELS
Power User
Got the holeshot
use some plumbers strap and hang it from the tail light brackets
The person who says it cannot be done should not interrupt the person who is doing it.
Rides
85 ATC350X
85 ATC200X
My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x
Got The Holeshot
Arm chair racerJust too addicted
I drill 2 hole in my license plate and bolt it between frame and tail light rubber,using the same bolt.The license will be behind the tail light
1986 ATC500X
1985 ATC250SX
1985 ATC200X
1985 ATC250R
1986 ATC250R
1984 ATC250R
1981 ATC70
1984 ATC70
1985 ATC70
Custom built ATC70 / 250R laydwon swap
1986 ATC250SX FATCAT
Got The Holeshot
Arm chair racerJust too addicted
Not sure if you wll see but check this picture
1986 ATC500X
1985 ATC250SX
1985 ATC200X
1985 ATC250R
1986 ATC250R
1984 ATC250R
1981 ATC70
1984 ATC70
1985 ATC70
Custom built ATC70 / 250R laydwon swap
1986 ATC250SX FATCAT
Reply With Quote
