Results 1 to 5 of 5

Thread: 1983 200E part sources / add'l advise

  1. #1
    nxcj is offline New to the board Arm chair racerNew to the board
    Join Date
    Mar 2009
    Location
    Iowa
    --
    32

    1983 200E part sources / add'l advise

    New guy. Great place and I've been searching and reading for four days straight.

    My trike history in 30 seconds:

    I hadn't been on a three wheeler since I had my brand new 1984 125M (fun bike for an 11 year old). (cousin had an 82 250R that we pounded on as well)

    Last week I ran across an 82 200E and thought it would be fun on my acreage. Well, that lead to finding a parts rig in the 83 that I bought the next day (with a junk motor). I've got $400 in both which seems fairly reasonable.

    The 82 has a 200 (non-big red) motor, which runs good. Trike is just a jackpot of misc. years and models.

    Anyway, on to the point of my post. The 83 turned out to be a runner, after I wrenched on it for an afternoon. I'm currently diagnosing electric starter, sub-tranny, and clutch issues.

    What I found out today: The brain trust that last had this apart left out the washer from behind the starter gear, allowing the gear to rub on the timing chain adjuster. MAIN QUESTION OF MY RAMBLING: Can anyone tell me a source for just the washer (I'd make one on the lathe if I can find the required thickness) ?

    I also determined that the gears stripped in the sub-tranny were caused because the same idiot left washers out of here as well, allowing the gears to shift back and forth. Ebay unit is on its way....

  2. #2
    Join Date
    Aug 2008
    Location
    louisiana
    --
    1,499
    service honda should sell the washers.i just looked,about $1.30 each.
    Signature pic removed,becuase of no helmet.

  3. #3
    Join Date
    Apr 2006
    Location
    Crestview, Florida
    --
    2,429
    I've got a good bottom end from a 83 200e that i'll sell for cheap or part if you need it.
    The person who says it cannot be done should not interrupt the person who is doing it.


    Rides
    85 ATC350X
    85 ATC200X


    My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x

  4. #4
    nxcj is offline New to the board Arm chair racerNew to the board
    Join Date
    Mar 2009
    Location
    Iowa
    --
    32
    Huh, simple enough source. Guess I'm too used to dealing with old vehicles where dealers don't supply much anymore!

    Thanks.

    Eric, If I run in to more serious problems, I'll keep you in mind.

  5. #5
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,045
    eric, how much? I'd like a 200e bottom end for the wife's autox i want to do up.
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

//ArrowChat Integreation Code //