Results 1 to 10 of 10

Thread: how much hp?

  1. #1
    Join Date
    Apr 2009
    Location
    leesport
    --
    15

    Talking how much hp?

    how much hp will this motor make ( on estimate) 1985 atc 200x 1mm over bore 12:1 piston bigger cam ( not sure on exact size but the cam lobes are a little less than a 1/4 inch bigger than the stock one) and c16 race fuel, k&n filter, kerker exhaust. im just lookin for an estimate on the power it will make. also where can i find a tach and speedo for this trike. it would be nice to have one, thanks

  2. #2
    Join Date
    Nov 2006
    Location
    southern oregon
    --
    2,338
    I would guess about 12.5 hp..maybe more if you had a 5/16 cam
    2-stroke lover

  3. #3
    Join Date
    Apr 2009
    Location
    leesport
    --
    15
    thats not to bad. i would get the exact specs but i dont have a micrometer big enough. im happy as long as it will be faster than stock

  4. #4
    Join Date
    Nov 2008
    Location
    ontario
    --
    1,055
    i heard they are 17 stock at the crank and the utility 200's are 13
    proud owner of a trx300ex quad and an 85 atc 70

  5. #5
    Join Date
    Jun 2008
    Location
    NE Indiana
    --
    1,067
    I estimate about 20-23 hp.

  6. #6
    Join Date
    Nov 2007
    Location
    ulysses pa
    --
    1,231
    [QUOTE=c10-chevy;741577]how much hp will this motor make ( on estimate) 1985 atc 200x 1mm over bore 12:1 piston bigger cam ( not sure on exact size but the cam lobes are a little less than a 1/4 inch bigger than the stock one) and c16 race fuel, k&n filter, kerker exhaust. im just lookin for an estimate on the power it will make.

    i found this searching. pretty interesting.
    http://www.3wheelerworldforums.com/s...00x+horsepower

  7. #7
    Join Date
    Dec 2004
    Location
    Baltimore, MD
    --
    6,088
    You will have to play with the cylinder to help you get some really big power out of the engine. The potential is there though. But big power means you will loose alot of rideability unless all you are doing is wide open throttle riding. Big horsepower doesn't work well in the woods or for most pleasure riding.
    Nicholson 500x (Project)
    Nicholson 185s
    Nicholson 110 (That takes an atc70 tank)
    Ascott 500 head/350x (Project)
    Homebuilt Racer Chromoly Suspension 110 (Ragin Runt)
    PK Racing Suspension 70
    A+ Inc Suspension 70
    AWS Aluminum 90 frame
    Hi Performance ATC Suspension frame rd350
    Hi Performance ATC Suspension frame 90

  8. #8
    Join Date
    Apr 2009
    Location
    leesport
    --
    15
    i was told that with the setup im going to run that it will have good performance and still be reliable. most of the riding is full throttle. the only reason for using the 12:1 piston is i got a good deal on it and it was brand new so ill put it to use

  9. #9
    Join Date
    Nov 2007
    Location
    ulysses pa
    --
    1,231
    here's some more info i found. around page 26-27 of this mag scan shows different hp ratings for a kerker set up.

  10. #10
    Join Date
    Nov 2007
    Location
    ulysses pa
    --
    1,231
    sorry,forgot to post the link. here ya go...
    http://www.3wheelerworldforums.com/s...eeler+magazine

//ArrowChat Integreation Code //