At The Back Of The Pack
Arm chair racerAt the back of the pack
85 200x rebuild
i plan on rebuilding the motor in my 200x because it started smoking like a banshee.i know i need the obvious:
piston rings
gasket kit
exhaust and intake valves
cam chain, sprocket, and tensioner
am i missing anything?!?!?!?!? i dont want to have my motor all apart and realize that i need something else and have to wait for that part to come in
First Time Rider
Arm chair racerNew to the board
I'd get new valve guides as well, and depending on the condition of the cylinder, you may need a piston and have it bored, as well. I actually found a guy on ebay that will do all the machine work for you on the head and the cylinder, as well as provide the parts for a very good deal, just barely more than the parts themselves through dennis kirk. Probably what I'm going to be doing in a couple of weeks.
http://stores.ebay.com/G-H-Discount-Atv-Supply
If anybody out there has used this service before, I'd like to hear feedback as well!
'84 Honda 200x
Anybody that designs something that they say is completely idiot proof, fails to realize the resourcefulness of a complete idiot.
The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair.
Power User
Got the holeshot
if your going to replace valves,replace valve guides and seals too.Originally Posted by 85200xrider
i plan on rebuilding the motor in my 200x because it started smoking like a banshee.
piston rings
gasket kit
exhaust and intake valves
cam chain, sprocket, and tensioner
am i missing anything?!?!?!?!? i dont want to have my motor all apart and realize that i need something else and have to wait for that part to come in
1985 ATC 250R.Team Red Trike
At The Back Of The Pack
Arm chair racerAt the back of the pack
i was looking into this too but he only does the cylinder...i want valves and everything as well
First Time Rider
Arm chair racerNew to the board
He has a head rebuild as well.
http://cgi.ebay.com/ebaymotors/Honda...mZ220066018875
Anybody that designs something that they say is completely idiot proof, fails to realize the resourcefulness of a complete idiot.
The major difference between a thing that might go wrong and a thing that cannot possibly go wrong is that when a thing that cannot possibly go wrong goes wrong it usually turns out to be impossible to get at and repair.
Reply With Quote