New to the board
Arm chair racerNew to the board
someone should make kick start levers for the older yz/it 490's. They are going for 150+ on ebay. They use the same splines as a banshee kicker but they have to be solid all the way around where a banshee kicker has a gap where it clamps down. Just an idea.
New to the board
Arm chair racerNew to the board
got a pic or a old 1 lay'n around? probably wouldn't mater if you used the banshee kicker as long as it went on the splines right. the tension bolt just keeps it from slipping on the splines.
Power User
The day begins with 3WW
Wouldn't a Banshee kicker be too short?
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
New to the board
Arm chair racerNew to the board
yeah the banshee one is too short and there is no way to keep it tight to the splines
New to the board
Arm chair racerNew to the board
how bout a blaster kicker? similar to the tri-z just a tiny bit shorter i think and has a piece of metal to the arm to prevent foot slipage.
?????
Power User
The day begins with 3WW
regardles sthier all too short if i rember corectly the 490 kickers were liek 11 inches long and the banshee and blaster kickers are what mabey 6 inches long.?
ok here goes, 85 atc70,2 84 atc70's 83 alt50,83 atc110 , 70 us 90 parot green, 85/86 350x garage queen, stock rider 85 350x, project 85 350x 85 250r drag bike, 2 85 250sx's, alt185, , scat tracker?99blaster,85 250r rider,85 250r ice racer project ,93 kx500,99 xr200r, 91 dr250s ,89 lt500 quadzilla,88 lt250quadracer, 88 trx250r race full on race quad,, 01 yamahakodiak400, kawaki kd100,lt50 for my doughters,93 300ex, 230 quadsport, lt185, lt250 quadrunner,84200s, is that enough?
Reply With Quote