Results 1 to 9 of 9

Thread: 86 350x carb pics

  1. #1
    Join Date
    May 2009
    Location
    new orleans
    --
    65

    86 350x carb pics

    Is this a stock 86 350x carb???

    Attachment 77957

    Attachment 77958
    Last edited by ssrecords; 07-31-2009 at 11:43 PM.

  2. #2
    bad350's Avatar
    bad350 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    May 2008
    Location
    kentucky
    --
    176
    nope, probably off a 250x or 300ex, it has an accelerator pump the 350x did not and it has a plastic choke lever

  3. #3
    Join Date
    May 2009
    Location
    new orleans
    --
    65
    When I bought the bike, thats what it had on it..The bike runs good but it runs real rich...main jet is #122, I don't know what # the slow jet is.. My question is where do I start to get this thing right???How do I tell what millimeter carb this is??

  4. #4
    Join Date
    May 2009
    Location
    new orleans
    --
    65
    I think it is a 250x carb...Do you think I would be better with a stock carb?? or is this carb better if i tinker with it

  5. #5
    Join Date
    Apr 2006
    Location
    Crestview, Florida
    --
    2,429
    get a 350x or 400ex carb
    The person who says it cannot be done should not interrupt the person who is doing it.


    Rides
    85 ATC350X
    85 ATC200X


    My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x

  6. #6
    Join Date
    May 2009
    Location
    new orleans
    --
    65
    anybody want to sell me a 350X carb??

  7. #7
    Join Date
    Oct 2007
    Location
    Grosse Tete, LA
    --
    3,440
    if you're buying a carb, your best bet is a yamaha warrior carb for the money...after that your best bet will be a 37mm FCR but it's expensive

  8. #8
    Join Date
    Apr 2006
    Location
    Crestview, Florida
    --
    2,429
    Quote Originally Posted by The Goat View Post
    if you're buying a carb, your best bet is a yamaha warrior carb for the money...after that your best bet will be a 37mm FCR but it's expensive
    How would you mount a warrrior carb? They have studs and the 350x slides in.
    The person who says it cannot be done should not interrupt the person who is doing it.


    Rides
    85 ATC350X
    85 ATC200X


    My Feedback http://http://www.3wheelerworld.com/...-for-Erics350x

  9. #9
    Join Date
    Oct 2007
    Location
    Grosse Tete, LA
    --
    3,440
    sorry eric... should have been more clear

    the yamaha warrior replacement carb...which is the PE 38 keihin

//ArrowChat Integreation Code //