I'm looking for a Kawasaki 292 single cyl. and a Hirth 338 single cyl. or even parts for these would be great. I'm getting into the old vintage racing and these were good motors to use. Thanks
I'm looking for a Kawasaki 292 single cyl. and a Hirth 338 single cyl. or even parts for these would be great. I'm getting into the old vintage racing and these were good motors to use. Thanks
1987 200x
1987 Big Red
1986 250R
1986 Tecate
1986 Tri-Z 250
1986 Big Red
1985 Polaris Scrambler
1985 KLT 160
1985 Tiger 250
1985 Big Red
1985 Big Red
1985 250sx
1985 70
1985 225 DX
1982 185s
1983 110{Red}
1983 110{Blue}
(2) 1977 ATC 90
1971 US90 Red
1971 US90 Parrot Green
1971 US90 Blue
One lungers eh lol. Those two motors will be tough to get the kawi 292's had problems with the coil going out. Post an ad on the www.vintagesleds.com classified section.
I ran a 292 A/C panther all last winter, with a 32mm mikuni carb, awesome sled, it would keep up with a 377 citation. I wish i knew were there was more, but does anyone know off a company making over sized pistons for the ol 292?
1984 200s
1984 big red
1980 Kawasaki Invader 340 liquid![]()
1993 GMC sierra, 4.3L automatic
1990 Chev Scottsdale -parts
1989 Chev wrangler 4.3L 5 speed- parts
Chevs are for parts GMC's are for driving
I can find STD pistons for the 292 but oversize are no longer available, at least where I have checked.
1987 200x
1987 Big Red
1986 250R
1986 Tecate
1986 Tri-Z 250
1986 Big Red
1985 Polaris Scrambler
1985 KLT 160
1985 Tiger 250
1985 Big Red
1985 Big Red
1985 250sx
1985 70
1985 225 DX
1982 185s
1983 110{Red}
1983 110{Blue}
(2) 1977 ATC 90
1971 US90 Red
1971 US90 Parrot Green
1971 US90 Blue
damn, i guess im going to be looking for a good cylinder this summer, mine has some bad scoring on the exhaust side.
1984 200s
1984 big red
1980 Kawasaki Invader 340 liquid![]()
1993 GMC sierra, 4.3L automatic
1990 Chev Scottsdale -parts
1989 Chev wrangler 4.3L 5 speed- parts
Chevs are for parts GMC's are for driving