Results 1 to 3 of 3

Thread: 86/87 200x swinger bearings

  1. #1
    Join Date
    Jun 2006
    Location
    Willow, Alaska
    --
    1,340

    86/87 200x swinger bearings

    Does anyone know where I can get a set of front bearings/bushings for the swinger on an 86 200x? Ive looked at all the parts sites I know, and all the parts dealers wont order them for me, since they 'just dont have them'. Or can I use a set for an early 200x or even a 350x???

    -Nick
    1988 Chevy Silverado 5.9L Cummins : 1986 ATC250R : 2012 Polaris RZR 570 :

    98% of Americans say 'OH $#!T!!' before going into a ditch on an icy road. The other 2% are Alaskans, and they say 'Here, hold my beer and watch this!!'

  2. #2
    Join Date
    Dec 2004
    Location
    Pa.'s Highest City
    --
    8,058
    Shoot Dads a pm on here or 3wheeler.org. He's our resident bearing guy and will be able to help you out with it I'm sure.

  3. #3
    Join Date
    Oct 2002
    Location
    Northeast
    --
    17,493
    I'll have to check but:

    20MM ID
    26MM OD
    30MM width

    I'm fairly sure thats the ticket. Any industrial supplier that deals in seals, bearings, v belts, single and 3 phase motors etc etc can get you the same bearing for a reasonable cost.

    I got in a hurry and use a tool a few thousandths less than I should have and slightly crushed my cage. I had to fin the bearing all by itself and I think they were 8$ each from my guy.

    Honda250SX also gets some good deals on bearings and or kits so hit him up as well as DADS,
    All our government does is distract us while they steal from us, misspend our tax $ and ruin our country

//ArrowChat Integreation Code //