Anyone know whats going on? Ive never delt with forks much.
http://www.youtube.com/watch?v=KGJxmObc9qc
Anyone know whats going on? Ive never delt with forks much.
http://www.youtube.com/watch?v=KGJxmObc9qc
1985 Auto X lots of upgrades
1982 Honda 185s 3inch wheel spacers, bassani exhaust
2001 400ex
1983 110
did u check for cracks up top? where the inner pipe meets the outer pipe?
Looking for some smaller style tires like the r's have, just 2 back tires. pm please.
That is so dark, I can't really see anything.
Nicholson 500x (Project)
Nicholson 185s
Nicholson 110 (That takes an atc70 tank)
Ascott 500 head/350x (Project)
Homebuilt Racer Chromoly Suspension 110 (Ragin Runt)
PK Racing Suspension 70
A+ Inc Suspension 70
AWS Aluminum 90 frame
Hi Performance ATC Suspension frame rd350
Hi Performance ATC Suspension frame 90
Sorry, the fork is moving when the front brake is applied.
1985 Auto X lots of upgrades
1982 Honda 185s 3inch wheel spacers, bassani exhaust
2001 400ex
1983 110
Both of my forks do that. I am not sure what is wrong either.
current rides
84 200x - being rebuilt-supertrapp exhaust, uni air filter, hopefully a 10.5 to 1 piston
84 big red - cobra exhaust, custom head lights
83 185s - 200e engine, cobra exhaust
82 yz 60 - engine is out supposedly needs piston and rings
stearing steam nut is lose, steam bearings are bad, front wheel bearings, or your forks are worn out.
1984 200s
1984 big red
1980 Kawasaki Invader 340 liquid![]()
1993 GMC sierra, 4.3L automatic
1990 Chev Scottsdale -parts
1989 Chev wrangler 4.3L 5 speed- parts
Chevs are for parts GMC's are for driving
I have never seen that. It is bowing somewhere in tube. i thought at first it was your neck bearings but i watched it a second time and could see that they didnt move. Could you do another vid without the boots on?
Never argue with an idiot. They will bring you down to their level and beat you with experience.
Calling an illegal alien an undocumented immigrant is the same as calling a drug dealer an unlicensed pharmacist.
1981 Wife ( Project)
Wow, that is bad. I don't know a whole lot about forks, but that is definately bad. Nice job on the vid BTW, nice and clear.
85 Tri-Zinger 60
85 ATC250SX
86 ATC250SX
87 ATC250SX
02 XR650L conversion
84 ATC 480R
Ill get another video hope fully tomorrow, Ill pull the boot down for the next video. I thought it was the stem was just loose because It clunked when I braked. But I watched it once and the whole thing shifted only when using the front brake.
Thats what I thought, I was like wow I don't think it should do that.
1985 Auto X lots of upgrades
1982 Honda 185s 3inch wheel spacers, bassani exhaust
2001 400ex
1983 110
When I watch that video, it looks like someone's havin his way with the 3wheeler....
I heard ya Johnny!
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
i didnt watch the video, but my trips/forks moved like a mofo when id put the brakes on...
there are sometimes 2 nuts that holds the trips on, one under the top tree and then one above the top tree...the lower one is usually one of those spanner nuts with all of the indents on it
1986 Tri-z
1985 250r
1985 200s
1985 70[/SIZE]
pull the forks off and tear them apart. Forks have to be one of the easiets rebuilds on a trike. Nothing to them. Inspect the tubes reall well. Never hurts to trear the forks down. New fork seals check the springs and new fork oil. You can have them done in a couple hours
Is it normal for the forks to compress a bit when you put the brakes on while moving?
Rob
there not compressing there arching forward w here the 2 pipes meet.
Looking for some smaller style tires like the r's have, just 2 back tires. pm please.