Got The Holeshot
Arm chair racerJust too addicted
i change the front sprocket on my 200x yesterday and she rips its gotta do over 60 now atleast it feels like it gotta get it clocked now lol it sucked getting the chain to fit though went to all th atv shops parts stores and no half link of all the places i found the half link at a hardware store lol i am impresses just waitin on my six pack rack and chrome foot pegs shifter lever now then should be done with the 200x reduild i will have to upload some photos of it on here
Power User
Lord of the trike
What sprockets are you running now?
Rob
Power User
The day begins with 3WW
Yes, what size are you running now. I need to go from the stock 12 tooth countershaft sprocket to a 14 tooth for the 18" H track tires I am running now.
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
Power User
Teaching quads a lesson
http://www.dropbears.com/u/utilities/sprocket.htm Here is a handy link.....
Got The Holeshot
Arm chair racerJust too addicted
figured i would leave the rear alone kept it at the 40 tooth and i put a 13 tooth on front i got to buy a better half link though got a cheap quality on on there now i really dont like it cause i had to use a used wore out master link cause the one that came with the new chain wouldnt fit in the half link i wanna clock it here in the next few days its hard to find a half link for the chain i got having a tough time locating one no luck yet running a primary drive o-ring chain got holes in the center links to through mud and junk out easy nt sure on that part yet havent been in mud yet so we will see i guess
Reply With Quote