i finally took a look at them and ofcourse no instructions how to install them, obviously the races get pressed into the steering stem, but how about the 2 washers with the rubber on them? and how about the solid metal washer? anyone used these yet.
At The Back Of The Pack
Arm chair racerFirst time rider
i finally took a look at them and ofcourse no instructions how to install them, obviously the races get pressed into the steering stem, but how about the 2 washers with the rubber on them? and how about the solid metal washer? anyone used these yet.
"Advice is Free, The Right Answer will cost you"
Power User
The day begins with 3WW
I would say the rubberized washers are seals 1 on top 1 on the bottom rubber side out. The solid washer probably goes under the nut on the steering stem.
Rides:
1986 ATC250R (sectional pipe and Klemm Research silencer)
1986 ATC250R (Desert Bike, WAX-ON seat, Dual Cibie lights, Steering Stabilizer)
1979 ATC110 (Bandito frame and forks, Turbo wheels, disc braked)
1982 ATC70 (Lifan manual 125)
1987 LT80 (piped, widened)
My feedback thread
http://www.3wheelerworld.com/showthr...ack-for-dcreel
RIP Trace.. Godspeed.
Power User
The day begins with 3WW
i have used them before and dcreel is right. the tapered berings are definitly worththier weight in gold.
ok here goes, 85 atc70,2 84 atc70's 83 alt50,83 atc110 , 70 us 90 parot green, 85/86 350x garage queen, stock rider 85 350x, project 85 350x 85 250r drag bike, 2 85 250sx's, alt185, , scat tracker?99blaster,85 250r rider,85 250r ice racer project ,93 kx500,99 xr200r, 91 dr250s ,89 lt500 quadzilla,88 lt250quadracer, 88 trx250r race full on race quad,, 01 yamahakodiak400, kawaki kd100,lt50 for my doughters,93 300ex, 230 quadsport, lt185, lt250 quadrunner,84200s, is that enough?
At The Back Of The Pack
Arm chair racerFirst time rider
yea i know, i hte the loose ball bearings that come stock lol. i am going to check em out this weekend, got to powdercoats and paint a couple more things them i can mount the front and maybe have a rolling chassis
"Advice is Free, The Right Answer will cost you"
First Time Rider
Arm chair racerNew to the board
Yep. I have those in my 350X... Assemble them as dcreel describes and pack them with bearing grease before you assemble!
** '85 Yama-225DX (wheelie machine)
** '85 350X (current project)
** '86 TR200 FATCAT (Old Faithful)
** '91 KDX250 (The Green Machine)
Reply With Quote