Trikefest swap meet post what you got/want

[Daddio]

This picture was from several years ago but the bike has been on the shelf pretty much in the same condition. I did swap out some correct size rear tires on some one peice rims i painted. the stock rear rims come with the bike. I also replaced the seat, the pan was pretty much scrap, the newer seat came with a blue cover. The carb will probably need cleaned as its been on the shelf for a couple years now. It also has the bone stock exhaust on it, not the basani thats pictured.











Asking 700$ I installed a brand new wiesco in it shortly after purchasing it as thats what was wrong with it, top end was toast. I will pull it off the shelf and bring it to tf but i want it paid for before i do. getting bikes off the shelf is a pain.

Wow, now you've got me thinking. If someone else doesn't take you up on this first I may be interested. I need to go over my finances, closely, before I make a decision.

[Itrike]

I remember this lil r . It was erectordale's trike at one time right? I will get with you tonight , consider it sold.

[LastFoolerInVA]

My brother & I will be bringing a bunch of 350x, 2nd & 3rd gen r parts with us... just look for the black trailer with FL tags

[thestud25]

I have a decent set of 81 250r rears. They have been painted, but will clean up nice. $75.00. I am bringing a 185s Nicholson weld on kit frame, Kiser has spoken and first dibs, but if he changes his mind I will take $300. I am also bringing a 85 ATC70 with the 5 speed motor. Runs and rides, decent plastic and Tank, $500. And of course anyone needing ALT50 parts speak now and I will bring them as well.

I may sell two of my RC Shinsei Dust Runner ATC250r toys. If there is any interest in those, I will post up pics and price.

[Daddio]

I remember this lil r . It was erectordale's trike at one time right? I will get with you tonight , consider it sold.

Thanks, Curt. I really didn't need yet another project right now anyway. I've been looking for a cleanish 1st gen R, like this for a while though. I was hoping to find one with a blown engine, or perhaps, no engine. I know someone with a complete Mugen 360 engine that's just been sitting on a shelf. I thought if I could find something like this I could inspire him to get back into triking again.

[captainweezy]

I am actually off to an early start on getting my trailer packed with parts and supplies. These pics are about 75% of what i plan to bring for parts. If anybody wants the frames(110, 350x, 200x, 250sx 250 big red) please let me know and a $20 deposit must be made because I wont have any extra room unless i make it! Plus my back doesn't want anything to do with lifting them. The sx motor and frame I will bring for $60 and it comes with a title! The 350x frame has a bit of weld on the left side down tube but appears to be strait. There is a very nice 86 big red frame for $35 and another sx frame for....$15! atc 110/90 frame for $15. I have a ton of fenders I am pulling out and grabbing some pics later. 3-4 sets of fiberglass atc 90, a couple 110's, 2 350x, 1 200x 83-84 2505 rear....Just shoot me a pm or post here..Thanks 3ww and trikefest and everyone who has already bought something from me!

[thestud25]

I am actually off to an early start on getting my trailer packed with parts and supplies. These pics are about 75% of what i plan to bring for parts.

Hey Weezy!! What are you asking on that ATC70 tank? Also, do you have any tires that are in decent shape for an ATC70? I also need a 22X9-8 tire(s). Let me know. You can call my phone if you need to!

[captainweezy]

No tires and that 70 tank will be cheap but its very junky. The entire top is caved in.

[thestud25]

No tires and that 70 tank will be cheap but its very junky. The entire top is caved in.

Bleh!!!! Send me some better pics please.

[big specht]

What are you wanting for the 185 and 110 fenders ???? and what condition are they in they look good in the one pic and do you have any good front 185 and 110 fenders

[captainweezy]

Well the 185s rear and 110 rear in the pictures are already sold when i get to haspin but let me dig up a few others.
Any chance you can get those ranger rears on rims you had last year? If so let me know the size. I have a can-am renegade and they may be perfect! I will grab pics of the front fenders I have. The red one in the middle pile is a brand new maier for a 83-85 110/125m

[loshe191]

Captainweezy what are you asking for 85 250R seat?

[atc350xer]

Well the 185s rear and 110 rear in the pictures are already sold when i get to haspin but let me dig up a few others.

Are those the 185s fenders that I requested, or are they for someone else? I'll be parts heavy and cash light, so I hope to do some bartering.

[atc350xer]

no one has a complete trike for sale or rent aint got bt 50cents.....



king of the road.
just flying in aint got nutin to ride but will compesate......just throwin it out there.

I'm sure someone can loan you a ride...

[captainweezy]

Captainweezy what are you asking for 85 250R seat?

$25, its A rider for sure. I think a couple of the threads are stripped out under though.