Crf 450 05 T0 3wheel.....

**xmode** · 02-20-2009, 04:36 PM

I Always Wanted To Do That But When I Saw Jason Do It I Said I Will Do It Too.....

i have already started the project...
here are some pics

**xmode** · 02-20-2009, 05:10 PM

some front forks pics...the center is from a tecate 3 250cc 86 model.

same ebay buys

**xmode** · 02-20-2009, 05:12 PM

i forgot to say that i will cale it cfr 450 X project

**xmode** · 02-22-2009, 06:42 AM

this is my axcel...

**factoryX** · 02-22-2009, 07:12 AM

now you did see the other thread where sombody did this right? he had to mess with the rake, and also used a trx450r swing arm.

**xmode** · 02-22-2009, 09:26 AM

yes i know that...i saw all the work of jason...mine will be a litle deferent from jason...you will see in next pics...

**factoryX** · 02-23-2009, 03:11 AM

sweet, post these pics!

**Aka_am** · 02-23-2009, 03:12 PM

Awesome!! Saving all the pics, take lots! I got 800 saved up so I can do this.

**xmode** · 03-01-2009, 07:51 AM

factoryX I WILL POST THEM AS SOON AS I TAKE THEM...THIS DAYS I AM MAKING THE FRONT FORKS BASES.(TRIPLES)?

**xmode** · 03-01-2009, 07:58 AM

THIS IS MY SUBFRAME FROM EBAY.....

**The Goat** · 03-01-2009, 08:32 AM

are those the lonestar billet hubs? if so, how tightly do they fit to the axle...I've heard some reports they are slightly loose, which leads to spline failure...

looking good so far...get the whole frame polished when done.

**atc500x** · 03-01-2009, 09:58 AM

I 've heard the same thing,a friend install them on a 400ex and axle nut was always loose and cut the cutterpin.heck this if you want to keep your wheels.

**xmode** · 03-01-2009, 06:21 PM

THE billet hubs ARE G FORCE AND THEY FIT VERY TIGHTLY TO THE AXCEL...SO TIGHTLY THAT IT IS DIFICULT TO PUT THEM IN....

**300rman** · 03-01-2009, 07:04 PM

hmm, nice project.....but a 500 would look WAYY better in that chassis

**xmode** · 03-02-2009, 08:41 AM

What Do You Mean With That?

Thread: Crf 450 05 T0 3wheel.....

Thread Tools

Crf 450 05 T0 3wheel.....