Are they going to fix the bell diameter issue or at least remove the bead retainer "notches" that are on these wheels? I have had a terrible time mounting tires on these wheels...
.160 custom spun wheel halves welded, They have no valve stem holes so you can put them where you need too!
the price 125 + 15 to ship!
Here is one that was installed at TF and rode all week Itrike can confirm it!
Here is an unground 250r hub inside the wheel too!
These will fit the COOL 86-87 tecates Pictures for the tecates will be at the bottom
10 inch wheel on 85 200x with 86-7 200x front hub!
OK lets clear this up!!!
1985-6 250r Clears the hub wont clear MOST caliper need to take 4mm off the 1st and last caliper fin
1985-6 350x Clears hub caliper bolt on deal
1986-7 200x WILL FIT!!
Also will fit 1st Gen 200x with hub swap from a 86-87 200x and small amount of grinding on the caliper!!!
1986-7 tecates clears hub and caliper with no problems
Will not fit the Tri-z with out putting honda forks and hond hub on your triz you need 86 tripples to do so! It wont fit with just changing the triz hub to a 250r one sorry i tryed!
Last edited by Xowner; 12-16-2013 at 12:30 PM.
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
Are they going to fix the bell diameter issue or at least remove the bead retainer "notches" that are on these wheels? I have had a terrible time mounting tires on these wheels...
SAY IT!!!!!
85 1/2 Tri-Z - The Trail Bike w/Inverts
85 Tri-Z - The wifes Bike
85 Tri-Z - The MX/ICE Bike, 310 w/Inverts
12 Tri-Shee - The Flat Track/TT Bike w/Inverts
NYTRO - New York Trike Racing Outlaws - COME GIT SOME!
I have these wheels and have had not a single issue mounting tires,, different brands of tires might be the reason,, with me no issues,,,
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
I need one. How do we order
Honda harry 1
86t3 1
Kevin Harry (FB) 1
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
count me in for one!!
Put me on the list for one! Thanks!
1985 Honda 250r
Honda harry 1
86t3 1
Kevin Harry (FB) 1
1982atc250r 1
yamaha225dr 1
Mr. Clean 1
I have purchased two of these and I highly recommend them. I was able to clear my '85 250R caliper with ~1-2mm to spare.
Honda harry 1
86t3 1
Kevin Harry (FB) 1
1982atc250r 1
yamaha225dr 1
Mr. Clean 1
Honda harry 1
86t3 1
Kevin Harry (FB) 1
1982atc250r 1
yamaha225dr 1
Mr. Clean 1
Kasey 2
piston88 1
Last edited by Xowner; 10-10-2013 at 10:40 PM.
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
Honda harry 1
86t3 1
Kevin Harry (FB) 1
1982atc250r 1
yamaha225dr 1
Mr. Clean 1
Kasey 2
piston88 1
Jim Nemacheck 1
Gonna let this go on another week or so Then order them
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
I will take one!