Yamaha 3 wheeler owners Club

[davidcool]

I Need A 125 Tri Moto Carb Dose Someone Have One They Are Willing To Sell.

[MonroeMike]

I Need A 125 Tri Moto Carb Dose Someone Have One They Are Willing To Sell.

Please post this over in the classifieds section, Mr. Cool.

[harryredtrike]

mike you should be the president of the yamaha club with all the yamaha's you have

[lookinforone]

1984 Tri Moto 200E Shaft

any close up pics of that rear rack?

ive got a Tri Moto 175, unsure of the year.

[MonroeMike]

^Lots of back racks (some close up pics too) on Yam's over at http://www.bikepics.com/yamaha/

[cleggy]

Hi all, I have just bought a Yamaha three wheeler the bloke I bought it off is not sure what flavour it is, after looking through the forum I think it is a YTM 200 ern as it is shaft driven and has reverse and possible electric start. Its in need of a lot of work and I am keen to get started . I am struggling to find a manual for it in New Zealand and would appreciate any tips on getting started.
Thanks Clegg (new to the three wheeler world

[lookinforone]

good lookin trike.
search on here for the manual, i know there is one for the 200.

[MonroeMike]

Hi all, I have just bought a Yamaha three wheeler the bloke I bought it off is not sure what flavour it is, after looking through the forum I think it is a YTM 200 ern as it is shaft driven and has reverse and possible electric start. Its in need of a lot of work and I am keen to get started . I am struggling to find a manual for it in New Zealand and would appreciate any tips on getting started.
Thanks Clegg (new to the three wheeler world

Welcome to the board and the Yamaha club.

Check for a manual here.

http://www.3wheelerworldforums.com/s...ad.php?t=56218

[cleggy]

Thanks for that, will have more of a clue of what i am doing

[shadix518]

i just recently picked up a 1985 tri-moto 200 or better known as ytm200n. it needs a new set of rings and gaskets then a different carb if anyone has one in decent shape let me know but here it is

[cleggy]

My YTM 200 had a air box that was a bit worse for wear so i removed it and fixed a k&n type air filter on it. it starts and runs ok but things are still not quite right. The choke cable is tight and im unable to move it. Am i going to have to buy a new carb? can the carb be set and bypass the choke. Is there another carb that can go on on in its place

[jamiegolf]

ive got a ytm225drs 1986 model, just come back from TF uk, at the moment its factory but its soon to have a 85 triz front end, triz rear hubs are rear wheels (wider rear track) and i have recently bought a yam 250 timberwolf quad thats guna have the engine swapped with the ytm225!!

[gutterworks129]

These are my Tri-Z that I've been working on for a while. The 85 yellow Tri-Z came from New Jersey from the 1st owner with OEM plastics in great condition, chain/sprockets , piston/rings, certificate of origin and service manuel. The 85 1/2 and true 86 were in boxes and milk crates that I bought from a dude in NC that use to race and own a race shop. They were a mese, I rebuilt the cranks and new top ends, plastics, powder coated all three frames. It was a lot of work and time in the shop and hunting down hard to find parts. I have a lot of parts so I'm building a fourth Tri-Z. I should have some pics shortly. Cheers.

[Yamada]

Wow gutterworks, you have a nice collection! Which one is your favorite?

[gutterworks129]

Well I've switch wheels and put the 8" with Turf Tammers back on the 85, 9"with the Banshee tires on the 85 1/2 and 9" with the 501's on the 86. The 86 is my favorite with the 6-speed trans and the white plastics. I just got a silver set of rims for the 85 1/2 which is what came on that year. I'm going to put black powder coated rims on the Tri-Z I'm building, maybe with black Baja rims!