First Time Rider
Arm chair racerNew to the board
I have a carb it number is PD 55B.............
And its not on this page,...but there are PD 55A , and PD 55C..........???
Someone know what is it??,.....and in same time tell me the initial setting of the pilot screw opening and the clip position of the needle jet???
1985- ATC 350X.................Stock (for now)
1983- ATC 200...................W/250R Front end + 200X carb.
1985- ATC 200s..................Stock (courtesy one)
1983- ATC 200X..................For project!!!!
1984- KXT 250 Tecate.........In project!!!!!!!
1985- ATC 200m ................In project!!!!!!!
'http://www.youtube.com/user/tordeur4x4'....on YOUTUBE to see all my videos!!
Power User
The day begins with 3WW
I don't have PD 55B listed in any book.
What main jet is in the carb and what bike are you putting it on?
First Time Rider
Arm chair racerNew to the board
Its strange,..they give the 'A' and 'C' But no 'B'!!!!Originally Posted by MonroeMike
It come with my ATC 200 '83,.....The guy tell me he had change it, but dont know from what it come!
And it was super clean , so i let it on!!.....just need a little adjust (pilot screw opening i think)
Dont remember well but i think the main jet is 95,....but i need to re-check to be sure....
1985- ATC 350X.................Stock (for now)
1983- ATC 200...................W/250R Front end + 200X carb.
1985- ATC 200s..................Stock (courtesy one)
1983- ATC 200X..................For project!!!!
1984- KXT 250 Tecate.........In project!!!!!!!
1985- ATC 200m ................In project!!!!!!!
Power User
The day begins with 3WW
If it were mine...
Pilot - 2 turns out
Needle clip - 3rd groove
..and go from there.
Power User
Roostin Away
Thats funny tordeur. Might be a canadian model carb.
The Green No More Red EVER EVER EVER AGAIN!!!!!!!
1985 KXT 250 Tecate
1984 KXT 250 Tecate Parts machine
1985 KXT 250 Tecate My vintage racer
1983 KX 250
Proud member of
3wheelerworld.com
3wheeler.org
Planettrike.com
Airfoolers.com
http://www.3wheelerworldforums.com/s...ad.php?t=80907
First Time Rider
Arm chair racerNew to the board
Exactly what i did!!!!
So its not perfect yet,....will continue testing......or change it!!
THE MAIN JET IS...: 98
....And my friend got a ....: PD 35E ??????????? got it on a ATC 200 '82!....(probably not his original)
Dont know what it is too??????
1985- ATC 350X.................Stock (for now)
1983- ATC 200...................W/250R Front end + 200X carb.
1985- ATC 200s..................Stock (courtesy one)
1983- ATC 200X..................For project!!!!
1984- KXT 250 Tecate.........In project!!!!!!!
1985- ATC 200m ................In project!!!!!!!
Reply With Quote