ytm200 clutch help !

[PAPA250r]

having trouble with my ytm200 . I recently changed my bottom end and had swap out everything in the right side cover.

anyway I installed the motor it started right up . I shifted through the gears everything worked good on blocks . then it stopped . I shifted into the gears and nothing hapened . wheels turned slightly but stopped at soon as I let it off the blocks .


what would cause this ? secondary clutch too tight ? to loose ? primary clutch too tight too loose ??

thanks for any help

[PAPA250r]

any ideas ? also the 'increase-decrease' adjustment screw is bottomed out and does nothing ?

[MonroeMike]

Try adjusting the clutch.

Loosen the locknut. Turn the clutch adjuster with a screwdriver counter clockwise until resistance is felt. Turn it back, 1/8 turn (clockwise). Tighten the locknut to 11 ft.-lbs.

[PAPA250r]

thanks I just seeen that . I have a haynes manual but its not as detailed as the honda manual. and I can't view pdf files right now.

ill give that a shot .

[PAPA250r]

took it back apart and i didnt have the arrows lined up on the clutch . and it kept it form tightening right..lol

running great now . thanks for the help :Bounce

[MonroeMike]

Glad you got it fixed.