carb rebuild kits.. [Archive]

hondamaniac

01-04-2011, 09:25 PM

hey everyone !!! hope all is well... as i have announced im new here an new too the big red 200e.. it desperatly needs the carb rebuilt.. my question is who is a reputiable seller of these kits...?
thanks in advance..... for sure...!

MonroeMike

01-04-2011, 10:49 PM

http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=171339&store=Main&catId=&productId=p172609&leafCatId=&mmyId=4920

hondamaniac

01-05-2011, 06:41 AM

jmax857

01-05-2011, 07:48 AM

lol can you find me a link for a tri z one?

MonroeMike

01-05-2011, 11:35 AM

thx again monroe mike.. purchased! now we wait lol thats the crappy part! haha... any ideas on where i may find the header gasket?? on the engine side? i purchashed another header an would like to change the gasket as well... i did some googling an only seem to find the whole assembly or the one that hooks the header an the pipe together... any help is really appreciated..!
nate

Same site.

http://www.denniskirk.com/jsp/product_catalog/Product.jsp?skuId=&store=Main&catId=&productId=p261060&leafCatId=&mmyId=4920

The whole list.

http://www.denniskirk.com/jsp/tpl/cmn/prodlist.jsp?store=Main&category=1&mmyId=4920&limit=50

oscarmayer

01-05-2011, 01:28 PM

i have manuals at my site in my link

rdlsz24

01-05-2011, 01:32 PM

If that carb kit doesn't fix the issue you are having you can get a new carb on eBay for your Big Red for around $30. They're not oem but they work well in my experience and I won't bother trying to rebuild a 25+ year old carb again if I can get a new one. A rebuild didn't fix the issue I was having

Rob

hondamaniac

01-05-2011, 08:19 PM

thanks oscar for the tip ill check ya site out... an once again mike thx... big help so far!!! rdslz24 i seen those on ebay was weary but i think im going to buy one as a back up.. wouldnt hurt.. for sure.... i have already purchased the kit ,which im going to tear into an learn it so if anything happens ill have a spare lol.. i work on my own harley an do aight so with the help of you guys im sure im in good hands... i really appreciate the help an the pointing to which direction i need to go.

my issues with the trike are these...
(a) trike has to run on full choke to run ..
(b) the original owner has welded a big ole flat washer to the header an tack welded it to the frame to hold it kinda over the exhaust port... which we all know is not good.. period..
(c) they also tack wwelded the damn gear shifter to the shifter rod or whatever its called... an ya know that just makes me ill.. lol lol
(d) headlight isnt working not sure why havent gotten that far.
(e) no brakes period.... front cable is missing rear as well...
my main concern is obviously the exhaust an carb first. then shifter an headlight an brakes an then from there.
thanks again everyone...!!!

rdlsz24

01-07-2011, 11:59 AM

If you're interested I have a nice shifter shaft and shift lever you can have for cheap. I had a 185s with the shifter welded on as well

Rob

hondamaniac

01-07-2011, 06:26 PM

what ya asking for it rob????
an just out of curiousity,how involved is that to change the shaft its self?? complete teardown?

rdlsz24

01-07-2011, 06:41 PM

$10 shipped. It's not that big of job. You don't have to split the cases. If I remember correctly the clutch has to come off and possibly the oil pump and rotor and then the shaft can be pulled out from the right side. You would have to cut the welded end off of course. You can see the diagram in chapter 8 of the service manual.

Rob

hondamaniac

01-07-2011, 07:31 PM

aight yea ill take it .... paypal??let me ask ya this rob....do you know of any sites that sell all of the airbox componets minus the box itself? its missing that guts... seen them on ebay but no where else...
parts are pretty readily avaliable from what i see....
thanks man!
i see your from illinois what part i am as well ! from mackinaw ,tazwell county...
i now live in nc though