2 wire voltage regulator

[Xpress]

I have what I believe to be a Moose Racing V/R:

http://www.motorcycle-superstore.com/2/9/195/15302/ITEM/Moose-Racing-Volt-Pack-Regulator.aspx?SiteID=CSE_GBase_195&WT.mc_ID=80003&zmam=88421133&zmas=1&zmac=2&zmap=15302&WT.MC_ID=54006&SiteId=10559669-3176192-

I want to put it on my Tecate, so I don't fry my light bulbs (ricky stator lighting coil- popped a couple of bulbs already), but I can't find any diagrams of the wiring process, nor can I really find any info on how to properly wire it up.

From what I have read, the yellow wire gets hooked into the positive lead coming from the lighting coil, then the negative goes to ground on the frame. Does this sound right?? I want to make sure I get this right before I pop any more bulbs, or possibly kill my lighting coil.

[Howdy]

I have what I believe to be a Moose Racing V/R:

http://www.motorcycle-superstore.com/2/9/195/15302/ITEM/Moose-Racing-Volt-Pack-Regulator.aspx?SiteID=CSE_GBase_195&WT.mc_ID=80003&zmam=88421133&zmas=1&zmac=2&zmap=15302&WT.MC_ID=54006&SiteId=10559669-3176192-

I want to put it on my Tecate, so I don't fry my light bulbs (ricky stator lighting coil- popped a couple of bulbs already), but I can't find any diagrams of the wiring process, nor can I really find any info on how to properly wire it up.

From what I have read, the yellow wire gets hooked into the positive lead coming from the lighting coil, then the negative goes to ground on the frame. Does this sound right?? I want to make sure I get this right before I pop any more bulbs, or possibly kill my lighting coil.

You are correct on the wiring. Use a zip tie to hold the unit to the frame some where.
I have wired a bunch of these and they work great.
Howdy

[Xpress]

Alright cool, thanks.