help on 250r

i have a 82 250r and the thing will idel for days and will rev when sitting but when i try to go the whole thing like dies. i dont know and i am so pissed. it was just rebuilt with a 60 over wiseco. and i just put a new plug in it also. Please Help ME

[Instinctz]

How experenced are you with two strokes? I know just a few months ago I started driving two strokes, and man I was frustrated. But after a while I learned you have to gun it quite alot more so that you dont dog it down.

But if you know all that good stuff, it could possibly be one of your jets, mainly the one that affects 1/4 to half. Which I think is the idle jet. But like you say it idles fine so I am not sure what you can do to help, unless what I said first works.

[dirtbasher]

from my experienc with 2 strokes they tend to load up when idleing for long periods of time. also you might be running it a little on the rich side, cause even tho it will idle when you go to take off it already has fuel built up in the crant and the fuel coming and it gets flooded. thats just a guess tho without hearing the bike run.

[200x Basket]

change the plug. that is a great starting point

Thanks for all your help. What the problem was that the main jet in the carb was cloged and after i cleaned it out it ran like a charm. THanks again.

[Wickedfinger]

.... Those aircooled "R" motors would rather run than not ..... I knew it was something simple.