PDA

View Full Version : tulsamike3434's Honda 1982 185s rebuild with pics and video!



tulsamike3434
10-09-2011, 01:36 PM
Well here I go again I blew my Honda 185s top end but I think Im just going to rebuild the whole trike here is what I am starting with. I will also post a walkaround video.


http://www.youtube.com/watch?v=64cfw8hnzlU

http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0092.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0089.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0090.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0091.jpg



If anyone has any helpful hints before I get started please let me know.

tulsamike3434
10-09-2011, 01:56 PM
My first question is will the engine come out of the frame without taking the top end off first?

KASEY
10-09-2011, 02:00 PM
Yes it will... Pretty easy too

leevarnado
10-09-2011, 02:09 PM
takes about 10 mins to pull that engine

tulsamike3434
10-09-2011, 02:13 PM
ok ill get started and if I have any problems ill hit yall up and thank you !

tulsamike3434
10-09-2011, 02:43 PM
ok I hope I am doing this right but this is what I have done so far...

http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0093.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0094.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0095.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0096.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0097.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0098.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0099.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0100.jpg

Motor still wont budge i must have missed a bolt somewhere.....

tulsamike3434
10-09-2011, 02:59 PM
then...


http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0101.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0102.jpg

leevarnado
10-09-2011, 03:39 PM
few things i remember correctly.the following need to be unbolted

exhaust header and silencer

motor mounts:top of engine,front of engine,bottom rear mount,mid rear mount

shifter

loosen chain tensioners and move axle forward

electrical

carb.

tulsamike3434
10-09-2011, 04:11 PM
Well I got it out now what lol?

http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0105.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0106.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0107.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0108.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0109.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0110.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0111.jpg

tulsamike3434
10-09-2011, 05:00 PM
Next I am going to take the side cover off. What do you think of that head?

http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0112.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0113.jpg

tulsamike3434
10-09-2011, 06:26 PM
Ahhh found the knocking problem hsve s look st thid!

check the video what could have caused this?


http://www.youtube.com/watch?v=HmfCLUUlx3I
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0114.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0115.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0116.jpg
http://i1093.photobucket.com/albums/i434/mikesatcshop/1982%20Honda%20185s%20Rebuild/IMAG0118.jpg

tulsamike3434
10-09-2011, 06:44 PM
My question now is will a 200 fit in a 185s frame?

leevarnado
10-09-2011, 07:32 PM
direct bolt in

dougspcs
10-09-2011, 07:46 PM
Your timing chain sprocket looks screwed..looks like your timing chain was slapping around then jumped. Judging by the knock marks in the top of the piston the valve timing went off..

The knocking sound was the piston hitting the valve..look closer!!

The chain rub marks on the inside of the engine cover is the least of your problems.

Change your oil once in a while..look at the sludge in your engine!!

Junk engine!!!

tulsamike3434
10-09-2011, 08:11 PM
i guess ill part it out,