Tri-z exhaust questions

[Toledo_Tommy]

Simple question : Is this a stock pipe for a 85 tri-z ? I didn't know if all stock pipes came with bolt on heat shields.
Thanks for your input.
133903

[Just-Tri-It]

Not stock, from the way it looks in the pic.

[bigredridr]

looks aftermarket dg maybe. my stock pipe sits higher and has a "dent" to go around the lower corner of the radiator

[MOTOMAX27]

yep looks like a dg. maybe phase 5?? they look a like.

[bigredridr]

http://www.3wheelerworld.com/showthread.php/132835-Tri-Z-Pipe-Official-ID-Thread?highlight=triz+pipe[/URL]35-Tri-Z-Pipe-Official-ID-Thread?highlight=triz+pipe

not sure how to do the link deal.

[badass350x]

Looks like a old school DG too me!

[Toledo_Tommy]

Yea, I can not find any stamping on it at all but thanks for the input. The Gasket seems to be leaking exhaust , how hard is it to find a new seal/flange/gasket for these ?

[Just-Tri-It]

I've got a post somewhere on the board with the part number that you can use at your local parts house. The gasket with the metal insert and soft outside is the better one. If you can't find the post I'll try to look for it in the shop. On some aftermarket pipes it may take a little silicon also.

[MOTOMAX27]

clean it very good. use rvt gasket making. let it dry for 24hr then add more let it get tacky and push it in. works the best.

[dirtface]

My Tri-Z has an Answer pipe and silencer on it and it looks alot like yours.

[Toledo_Tommy]

Honestly I was thinking answer just because the silencer looks like a old answer silencer i had my wr500 2 stroke.