350x worn cam and rocker box/head repairs?

[novaman]

so my kids 350 x has a worn cam and the head /box are both worn too, whats the common fix for this (if any). I was told possible machined and roller bearings, and are cams available to fix this??

[arlaunch]

You can still buy the cam from Service Honda. For a 1986 anyway.

Do you think this happened because the valves were never adjusted?

There are a couple of youtube video's out there, with what seems like a little coverage on this matter?

https://www.youtube.com/watch?v=UPgCBjhNSGY&index=2&list=PLCp5uzdPWo2eAXe6dcJ5If2re8Tk4Uyw5

https://www.youtube.com/watch?v=3BoVcUKNc_0&index=4&list=PLCp5uzdPWo2eAXe6dcJ5If2re8Tk4Uyw5


If the top end is completely worn, the bottom end may need some work too.

This is starting to sound very expensive.

[novaman]

its all messed up, cylinder and piston are good, getting new rod and bottom bearing and hopefully a easy fix for head, had damn aftermarket filter on farb, no air box, have new stock airbox for after repairs, dirty dirt!!

[Dirtcrasher]

No easy fix for that head, expensive, yes.

Try to find another head.....

[oscarmayer]

I am with DC. Get a good used head off ebay, or even good used top end.