Honda atc70

[vtoc]

HI First time user I'm from Australia. Anyway I just got a 79 Honda atc70.
It's had to start fuel sometime comes out the air filtterand I would like to do the points is there a manual online. Hard to get and very dear over here

[atcmatt]

Gday mate, fellow aussie here. Welcome to the board! Where abouts in australia are you located? Im from sydney myself, there are a few other aussies on here and most are from newcastle. I cant help you with your problem but im sure you can order a manual for your 70 online or some where. I got one for my atc200es but i just cant remember. It cost me around 50 bucks, it is a definite item to have.

Matt

[42F67N]

I searched high and low for a online 70 manuel with no luck i picked one up off ebay for 14 dollars though :-D

[mart]

hey mate where in aussie are u from im from newcastle nsw.from wat u said i think its not sparking properly carb clean? points adjusted properly?valves adjusted properly?how much compression?check over all the electricals earths,connections so fourth im sure its something simple hope it works out good 4 ya. wink

[vtoc]

Hi Matt and Mart I'm from Adelaide sorry for late reply.
still won't start no spark played with the pionts and bypassed the killswitch.
How do check the coil or gap on the pionts with a testlight or you can't do that coz it an't got a battery
the wires from stater black to coil and killswitch green to coil,killswitch and earth,yelow or green with red stripe to lights how does that sound


thanks for your time

[jdparsons1]

I would try ebay as well. There are plenty of clymer manuals on there for sale.

[ATCnut]

When you say bypass the kill switch, do not hook the wires together. That is the stop position. The motor should run with the wires apart. The kill switch works by grounding out the ignition.

[vtoc]

Killswitch wires are disconected from the loop not together