Log in

View Full Version : 200x



yamahaman89
06-28-2004, 07:10 PM
im getting a 200x and id like to get info on it also is it a 4 or 2 stroke

plkmonster2
06-28-2004, 07:16 PM
It s a four stroke, 192 cc, 85 and older, with a 5 speed. 86/87 were 199cc with a 6 speed. Chain drive, about mid 50's top speed, Made by honda, of course. What else... Disk brakes all around, and air cooled. Also, 83-85 had a round frame, and 86-87 were square, which is the easiest way to tell the year (Except if the sticker is still on the frame.) ;)

200xalltheway
06-28-2004, 09:13 PM
that about sums it up.

vartiak15
06-28-2004, 10:10 PM
the 85 had a box type swinger were as the earlier modles had a tubular swinger. they kick arse in the trails, ummm, very very easy to work on and are dependable. they go closer to 60mph. best trike out there lol

yamahaman89
06-28-2004, 10:23 PM
the more i read the more i want come on im hungry for more the one im gettin is a 83'

84honda 200X
06-28-2004, 10:29 PM
The 83 model had 191cc and the 84 to 85 had 192 and the 86 to 87 had 199cc

vartiak15
06-28-2004, 11:40 PM
put an 85 swinger on there it is stronger

leprogle
06-29-2004, 11:18 AM
84 is the same, it was only the 83's that had the tubular swingers

trikerider2oo7
06-29-2004, 12:25 PM
Frame number JH3TB0526DC263800~
Engine number TB05E-6000034~
Engine type 4 stroke, Air cooled
Displacement 192cc
Bore x Stroke 65 x 57.8 mm
Compression ratio 9.6 to 1
Compression 142 - 170 psi
Transmission speeds 5 speed
Clutch Type Manual
Oil Capacity 1.3 Qt
Carburetion 24 mm Keihin
Starting system Kick Starter
Fuel capacity 2.56 Gal , 0.31 Gal res.
Wheelbase 47.6 in.
Overall Length 72.8 in.
Overall Width 41.3 in.
Ground Clearance 4.9 in.
Seat height 27.8 in.
Front tire 23.5 x 8 x 11
Rear tires 22 x 11 x 8
Front suspension Hydraulic Telescoping Forks
Rear suspension Mono shock
Front brake Hydraulic Disk
Rear brake Hydraulic Disk
Final drive Chain
Dry weight 282.2 lbs
Approx. retail new $1,698.00

yamahaman89
06-29-2004, 01:34 PM
im a big guy were can i find a shock for the rear tat will hold me good

vartiak15
06-29-2004, 01:39 PM
throw a 350x rear shock on there all u need is the shock and the part muddy200x is selling on ebay(helpin u out muddy lol) and for the front all u need to do is chnger the steering stop. im a big guy 10 about 6'5'' 200lbs and mine is good with the normal shock but it needs a lil more stiffness so im going to get one of thoes custom made parts from muddy. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43974&item=2483269062&rd=1