need magneto wireing help for atc70

[Chris35]

I got this honda atc 70, i pulled the flywheel and you can see 4 wires, one black, one green, one dark green, and one red. anyone know where all these are supose to go? i have the ignition coil

[Unclediezel]

Welcome To the board Chris- Check out the front of the site--
http://www.3wheelerworld.com/WiringHome.shtml

[Chris35]

it dosent help, b/c i still dont know where to up the red wire

[TeamGeek6]

May be the wrong stator? The diagrams dont show a red wire, they show 3 wires and frame ground.

Get an ohmmeter and read black and red to frame. The one with highest resistance (probably black) is for the ignition. The lights windings usually go a couple ohms, but with a cheap ohmmeter, its hard to tell between that and reading right to ground. Might have to look at the stator windings to prove which one is which, lights windings will take up most of the stator.