PDA

View Full Version : HONDA 250R Axle


BeastMan
02-09-2006, 04:44 PM
what would you need to do to put a honda 250 axle with the sproket on the right side into a yamaha 200 frame? and how hard would it be?
ATCWRENCH
02-09-2006, 04:48 PM
your first delima will bearing alignment, then your second would be chain alignment.
BeastMan
02-09-2006, 04:50 PM
anything afer that? chain wont be too hard, but bearings, i can chop my frame to make it fit? would that work? sorry im a noob at this stuff
ATCWRENCH
02-09-2006, 05:06 PM
I've never seen the back of a yamaha 200, but you might beable to fab something up to hold a 250R bearing carrier. that will solve the bearing alignment issue.
Yamahauler
02-09-2006, 05:22 PM
Why dont you just get a Yamaha 200 axle? It would probably a lot cheaper, or are you looking for better wheel choices?
BeastMan
02-09-2006, 06:09 PM
i need to get n axle with the sprocket on the oppisite side of wat its on, becuz im puttin on a new motor and its on the oppisite side, and i dont kno if its possible to switch the brake and a the sprocket from the place its in..
BeastMan
02-09-2006, 06:27 PM
if it is possible to switch the sides the sprocket is on then let me kno, but i can get a 250R axle from a friend that doesnt have anything from the bike other then the axle, so hes goin sell it to me for cheap,
BeastMan
02-09-2006, 08:18 PM
can anyone help me here, i need as much info as possible before i start this project!!
3leggeddog
02-09-2006, 08:55 PM
hmm,sounds a little crazy.i say just restore it,and enjoy it.don't mutalate the poor trike.buy a quad for that!!!!!!!!!!!!!!
BeastMan
02-09-2006, 09:25 PM
i would but i got this trike free, and i can get a 250R motor REALLY cheap..so..ya..lol i wanna put that in it
TimSr
02-09-2006, 09:32 PM
Sounds like you are re-inventing the wheel. I suggest selling the parts you have, and then buy what it is you want.
BeastMan
02-09-2006, 09:36 PM
no one around here would buy the parts, there all in bad condition, i just want to kno how i could get the 250R axle in my yamaha or change the side the sprocket is on..
BeastMan
02-09-2006, 10:42 PM
or how would that 250r axle bolt into a honda 200m frame? and how would a 20r motor fit?
kloby
02-09-2006, 11:17 PM
i think you'll just end up with more problems than its worth. just my opinion. :wondering