help

[dumdum9599]

:confused: hay all i need some info. how do you get the little pin out of the magneto asemble so i can get the side open and fix the gear for the gear indicator :confused: thanks
andre

[DeePa]

It would be helpful if you tell us what machine you need help with.

I have a bunch of service manuals free to download. Http://deepa.recongamer.com

maybe ill have the one you need and then you can look up the problem in the manual.

Mike

[dumdum9599]

:) that would be nice but i don't crosse me fingers because it is a 83 suzuki alt 125
andre

[dumdum9599]

i actually only need to take otu the flywheel but i don't know how this is my first trike and had an oil leek as well at a cause of the gasket on the side the broken gear is on so no matte how i look at it i need to take the fly wheel off
andre

[Howdy]

To remove the flyheel you will need to remove the nut on the crank. You will then need to use the special puller and the flywheel should pop right off. If memory serves me correctly the puller is the same one used on most honda 185-200cc motors ( 185, 185s, 200, 200s ).
Howdy

[dumdum9599]

ok but i don't have a puler. so where could i find one and for how much
andre:)

[Howdy]

You can find the pullers on Ebay, denniskirk.com and many other places. Before you run out and buy a puller we need to confirm which one you need. I'm at home so I can't confirm anything right now. If I have time tomorrow I can try to check for you ( I have Suzuki flywheels and a bunch of pullers ).
Howdy

[dumdum9599]

thank i will be on and off all day tomorw
andre:)

[dumdum9599]

would there be any other way to pul out the the fly wheel without a puler:confused:
andre