Stock Honda Wheel Questions

[BigGreenMachine]

Are all 200X/300EX/350X/250R/400EX wheels center offset?

Are they all 8 x 8?

[oldsking86]

You could get 9x9's that will be offset 3x6

[BigGreenMachine]

400ex wheels are 9's right? WHats the offset?

[BigGreenMachine]

WHat is the measurement of the bolt pattern of a Honda 4/110 hub??

Is it 110mm from center to center of stud holes?

[RedRider_AK]

Its from the outside edge of one stud to the center of the opposite stud.

[BigGreenMachine]

I dont think that is right.

Here you go. Should have googled it first off.

https://www.rsracing.com/tech-wheel.html#patterns

[RedRider_AK]

Well, Dennis Kirk told me that's how to measure bolt pattern. I guess he LIED. :(

[84honda200s]

i thought it was center to center of the studs ? but anyways i had 9x9 ams rims with 3+6 offset i looked threw a ams book and there were a pair of 8x8 rims with a 3+6 offset with a 110 bolt pattern as well.

[BigGreenMachine]

Are all honda trike/400ex and 300ex wheels the same? Which ones are aluminum with the greatest offset?

[250rAL]

i thought it was center to center of the studs ? but anyways i had 9x9 ams rims with 3+6 offset i looked threw a ams book and there were a pair of 8x8 rims with a 3+6 offset with a 110 bolt pattern as well.

You can't have a 3+6 offset with an 8" wheel. It would have to be 3+5.

[BigGreenMachine]

200X wheels are 4+4, 300ex through 450R are 3+6? Anything with a wider offset available in 4/110?

[oldsking86]

Nope all you can get is a 3+6.. there are 5x5 but that gives you inset instead

[250rAL]

I've never heard of 2+7; it would probably be too weak.