The Autox Project (Finished) **Updated Pics 9/12**

**zppeacock** · 08-23-2009, 08:22 PM

Picked this up last week for $300 Came with the original motor, kicker gears are shot as expected, I got it to run but it ran horrible. Took it out today and checked it over, the 200x motor is going to need at least a camshaft, timing chain, rockers, seals, kicker gears and a gasket. After a lot of thinking I'm going to do a AutoX. Here are the pictures when I got it home and now. My 185s snuck into a picture. I will update this thread as I work on the bike.

Finished Pics:

**oscarmayer** · 08-23-2009, 08:35 PM

can I has old motor?

**MonroeMike** · 08-23-2009, 08:44 PM

http://www.files.3wheelerworld.com/MagScans/autox.pdf

**harryredtrike** · 08-23-2009, 09:01 PM

your not going to gut the 185s are you?

**zppeacock** · 08-23-2009, 09:20 PM

Originally Posted by oscarmayer

can I has old motor?

if you were closer

Originally Posted by harryredtrike

your not going to gut the 185s are you?

Hells no. That bike is all original except the exhaust and tires.

**harryredtrike** · 08-23-2009, 09:27 PM

thats nice to know dude.good luck with the project

**zppeacock** · 08-23-2009, 09:58 PM

Thanks the 185s is my lil baby, always starts first pull.

**code200k** · 08-23-2009, 10:22 PM

the 200x plastics look damn near great i dont see a tear in the seat...its a shame

**zppeacock** · 08-23-2009, 10:45 PM

Originally Posted by code200k

the 200x plastics look damn near great i dont see a tear in the seat...its a shame

No tears in the seat, and excellent plastics, Thats why I don't want to part it out. I figured I can make it an autoX and then when I have the money I will evently rebuild the original motor.

**RapidRick** · 08-24-2009, 12:15 AM

Nice scores, Geez wish I could find that kind of a deal close to home (I'm assuming you didn't have to go far).

I'm 2hrs from a major population zone.

Best thing is Glamis is only 30 min away.

Sure would like another AutoX. Sure hard to beat with the young ones...

**QCR77** · 08-24-2009, 12:24 AM

nice find. good luck on the build

**inv3ctiv3** · 08-24-2009, 12:31 AM

If my motor dies in my 200x I am going to go autoX as well.

**oscarmayer** · 08-24-2009, 04:38 PM

i can pay for shipping! it's only like $40-$50 for the compelte motor!

if you swap, use the harness off the bile who's motor you use and their electronics. will make it much easier.

**zppeacock** · 08-24-2009, 08:41 PM

Why will it make it much easer, from what Ive read its just extending some wires and just pluggign them in.

**AutoXer** · 08-25-2009, 08:38 AM

Some of the plugs are different ... I used the 185 stuff on both of my auto-x's . On one of them I also had to space the left foot peg to clear the shift shaft. The brake off the 185 will work good also with a little more bend in it

Thread: The Autox Project (Finished) Updated Pics 9/12

Thread Tools