I changed the clutch in my yamaha but when i put it gear nothing happens. i'm pretty sure its all put back together right, checked it a couple of times. is there anything i'm missing. Please help.
Registered User
New to the board
I changed the clutch in my yamaha but when i put it gear nothing happens. i'm pretty sure its all put back together right, checked it a couple of times. is there anything i'm missing. Please help.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Did you adjust the clutch after installation according to the manual?
1985 Kawasaki Tecate 3
Registered User
New to the board
No i did not. where can i get a manual ? First time i have changed the clutch in my bike, maybe i should have done a little reading up on it first.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Edit* Send monroemike a pm, im sure he has a manual. I've got a manual for that laying around somewhere. I will see if i can find it, and look to see how to adjust after dinner.Originally Posted by fredwrado7
Last edited by 85Tecate; 11-28-2009 at 08:43 PM.
1985 Kawasaki Tecate 3
At The Back Of The Pack
Arm chair racerAt the back of the pack
Sorry for the double post. I went and found the manual and it says....
1: Loosen the locknut and turn the adjustment screw counterclockwise until resistance is felt
2: Turn the adjuster 1/8 turn CLOCKwise then tighten the locknut while holding the adjuster nut.
Hope this helps.
1985 Kawasaki Tecate 3
Power User
The day begins with 3WW
Welcome to 3ww.
What year is your Yamahauler?
Reply With Quote