looking for license plate mount ideas or pics (85 200x)

[firemen1219]

hey guys just lookin to see how some of you mounted your license plates on your 200x. I know there is probably a 100 different ways of doing this. im interested to see the different pics of your way!

[code200k]

zip ties onto the grab bar is what i did on my quad. i dont even bother to even throw a plate on my trikes and such..only did on the quad so it looked a lil better when i went on the road funny part was i got yelled at for having a librety plate on this was in 2005 any ways sorry for the rant but yea zip ties in the grab bar works great or maybe a actual metal mouting bracket off a motorcycle?

[harryredtrike]

why do you need a plate?

[MonroeMike]

Not a 200x, but Kasey made one for his R.

http://www.3wheelerworld.com/showthr...741#post782741

[JohnR.]

why do you need a plate?

When you register your ATV in New York they give you a license plate the same size as a street bike but with red letters instead of dark blue.

I run an AC grab bar on my R and my 350X, it has two tabs that are for mounting the number plate it comes with and I mount the license plate to the number plate then the number plate to the grab bar. I could also have put a strip of flat stock from one bracket to the other on the grab bar and attached the plate to that.

John

[firemen1219]

you got a pic of the grab bar with the plate mounted?

[JohnR.]

Here is a pic of it with the number plate:



The license plate is on the same type of number plate but its turned 90* so its tall instead of wide. I end up with an empty area on the bottom which I can affix the mandatory state sticker to when I go to someplace like Silver Lake. The bonus is that if I'm out there and this bike dies I can swap the number plate over to my 350X without an issue.

[muddog]

drill 2 holes and rivet