Results 1 to 7 of 7

Thread: 1985 honda 250sx with no spark????

  1. #1
    Join Date
    Apr 2010
    Location
    Invercargill, New Zealand
    --
    3

    1985 honda 250sx with no spark????

    i have purchased a 250sx that has been turned into a go kart but.. it has no spark i have tried many times and have given up i have a wiring diagram and have followed and i havent been able to find the problem. when i push the start button it doesnt do any thing (its not the start button) i have to put a spanner over the solinoid to wind the starter over i cant wind the motor over this way because i am missing a cog but i can wind it over on the kick starter but still no spark.. if anyone can help PLEASE if you could post a list of things it could be so i can try them all
    Cheers

  2. #2
    matt86200x's Avatar
    matt86200x is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2009
    Location
    Canada Eh!
    --
    366
    make sure the bike is in nuetral first off
    85 250sx
    86 300es in the making
    86 200x
    86 350x

  3. #3
    Join Date
    Dec 2008
    Location
    Monroe MI
    --
    5,787

  4. #4
    shadix518's Avatar
    shadix518 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    May 2009
    Location
    Wichita, Kansas
    --
    198
    easy thing to check first is grounds there is a ground on the right side that is it isn't grounded well it wont give spark.
    1985 Atc 250sx my first.....
    1985 Tri-Moto 200......SOLD
    1985 Yamaha 225dx.....


  5. #5
    Join Date
    Apr 2010
    Location
    Invercargill, New Zealand
    --
    3
    which ground is it???

  6. #6
    Join Date
    Sep 2007
    Location
    100mi west of Chicago
    --
    3,582
    There are 2 switches coming out of the bottom of the right side case. One is for neutral and one for reverse. The left one is neutral. You can unhook the wire from the switch and ground it to the frame if you can't get it to work any other way. I had to do this on my Big Red. Whatever in the bottom end that is supposed to let the cdi know the tranny is in neutral was not doing its job so I got no spark.

    Rob
    Last edited by rdlsz24; 04-19-2010 at 03:45 PM.

  7. #7
    Join Date
    Apr 2010
    Location
    Invercargill, New Zealand
    --
    3
    you legend

//ArrowChat Integreation Code //