200x rebuild

**james200x** · 10-19-2010, 11:29 AM

hi all i am rebuilding a 200x (84 model im pretty sure) the 200 x engine that came in it was knackered, so i fitted a 185 engine in all is running sweet.brakes rebuilt and working fine.heres the problem..

i never got a rear sprocket with the trike i only have the hub. is there a sprocket off a different bike/trike that fits the rear of the 200x? any help please !!!

**shortline10** · 10-19-2010, 11:34 AM

83-85 atc200x are all the same but never herd of any other model working on a 200x .

**oldskool83** · 10-19-2010, 11:39 AM

i think 81/82 r used same sprocket but not sure cuz i know the ext axles were pretty much the same but honestly i go on ebay and buy a new 200x rear sprocket to be 100% safe.

**james200x** · 10-19-2010, 11:39 AM

thats a bugger i live in scotland parts and complete 200x are rare.

**shortline10** · 10-19-2010, 12:12 PM

Originally Posted by james200x

thats a bugger i live in scotland parts and complete 200x are rare.

Ship one from the usa . shipping is about 15.00 us dollars in a flat rate envalope . If I can help you out LMK .

**MonroeMike** · 10-19-2010, 12:23 PM

Originally Posted by james200x

(84 model im pretty sure)

Enter the VIN here.

http://atcvin.webs.com/

Dennis Kirk has sprockets also. Not sure if they ship to Scotland.

http://www.denniskirk.com/jsp/common/Frontpage.jsp

**james200x** · 10-19-2010, 02:02 PM

cheers for the replys guys.i looked up the last link denniskirk for sprockets and the sprocket bolt pattern for the atc200x is different than my hub bolt holes.measuring it as accurate as i can it looks like a rear sprocket from a 01-03 honda xl 125 is the one to fit my hub and its a 44 tooth.Which if it does will make it easier to get a sprocket.But that leaves the question whys mine different?any ideas?

**shortline10** · 10-19-2010, 03:44 PM

Originally Posted by james200x

cheers for the replys guys.i looked up the last link denniskirk for sprockets and the sprocket bolt pattern for the atc200x is different than my hub bolt holes.measuring it as accurate as i can it looks like a rear sprocket from a 01-03 honda xl 125 is the one to fit my hub and its a 44 tooth.Which if it does will make it easier to get a sprocket.But that leaves the question whys mine different?any ideas?

Post some pictures .

**james200x** · 10-20-2010, 07:06 AM

sorry i made a mistake, the rear sprocket for my hub seems to be the same as a honda nsr 125,not xl as i wrote previous. so am gonna get one of them and hopefully that should do the job. i see that the denniskirk website sells a 4 hole hub has anyone fitted one of them?

Thread: 200x rebuild

Thread Tools

200x rebuild