First Time Rider
Arm chair racerNew to the board
Bikes rear damper seems to work just fine, but when I push it down via the grab bar, it takes about 1.5 secs to 2 secs to come back up. Could this be a spring issue, "worn out" seems to be maxed out per the service manual, spanner nut that is. I dont want to tweek it down too far I guess. A good bud of mine has a "83" that seems to be in better condition all around and his does not sag half as much as mine does with my fat arse on it. "230lbs" Any ideas?
1984 200x
1985 250es
Power User
The day begins with 3WW
Have you tried both adjustments?
Pages 16-17. http://campaigns.hondampe.com.au/Mot...n83atc200x.pdf
First Time Rider
Arm chair racerNew to the board
I have not, but will first thing in the AM, well not really, after work I guess. Thank you
1984 200x
1985 250es
First Time Rider
Arm chair racerNew to the board
Worked, thank you!
1984 200x
1985 250es
Reply With Quote