With your permission, the official model for 3 wheelerworld. Give this man a beer, Excellent build, it's coming together.
Just Too Addicted
Arm chair racerJust too addicted
With your permission, the official model for 3 wheelerworld. Give this man a beer, Excellent build, it's coming together.
At The Back Of The Pack
Arm chair racerAt the back of the pack
What i have in mind is getting her and Mrs.Eric250r in the same room together with a camera!!! Who's with me on this one??? Lol
Old enough to know better, but still young enough to not care!!!
Reality is for people who can't handle drugs!!!
86 XR250RX Custom but all Honda...
92 Yamaha Vmax
81 Yamaha XS1100
04 Polaris 700 Twin EFI
86 TRX 250r
At The Back Of The Pack
Arm chair racerFirst time rider
I have not seen Mrs. Eric250r... got a link?
Power User
Roostin Away
The build is looking good. Thank your wife for the pics too. Now get the bike done so you can post up some riding pics.
1986 ATC 250r
1985 ATC 250r
1985 X2 ATC 70's
1985 XL 80
If you have bought or sold with me please leave feedback.
At The Back Of The Pack
Arm chair racerAt the back of the pack
very nice build indeed, good looking suspension too
Dirty Main jets are my bane.
4 Wheels? Huh?
Hey you guys get stuff rolling and come to TF. I know it sounds far from Oregon but it will be worth it!!Originally Posted by ametzker
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
Power User
Got the holeshot
Bwahahahaha....
Tionesta Trikes ATC 450R
86 250R
86 Tecate-3
83 ATC 70
85 Big Red
81 KLT 200
85 250SX
Tricky Dicks Cagiva WMX 200 sold
Trikefest survivor 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20
My feedback: http://www.3wheelerworldforums.com/s...dback+eric250r
At The Back Of The Pack
Arm chair racerFirst time rider
very interesting thread....nice build. love to see it when its done.
1984 yamaha 200k
1985 honda 70...some times swap the 125 lifan for fun
1984 honda 200es
1985 honda 200x
atvs:
2013 Honda Rancher 420 ES
At The Back Of The Pack
Arm chair racerFirst time rider
I want to run 12v lighting on this trike, can anyone tell me if the moose voltage regulator is what I need. I just want to run some fog lights or harbor freight lights on it. Or can I just connect it to the stock wires and run it as is? Thanks for the help
Dirty Main jets are my bane.
4 Wheels? Huh?
pretty sure you can just hook it up right to the stock wires. If it had lights befor there is already a regulator built in it!
An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................
GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"MR.Clean"
New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412
Power User
Got the holeshot
The 185s does not have a regulator - the lights are the regulator.
The electrical system runs 12V AC to a 45W headlight and a 5W taillight. The lights don't care if you send them AC or DC.
If one bulb dies, the other goes with it because the extra juice has gotta go somehwere.
So, you can probably run a 55W light up front with no tail light and it will be bright enough. Maybe.
As a point of referrence - I had an 84 ATC 110 engine in a 78 ATC 90 frame. I used parts store LED marker light for a tail light. I managed to burn out both a 45W headlight and the tail light before I figured out the LED tail was using much less wattage than the original. I put a Moose regulator on that trike - problem solved and the stock headlight was plenty bright.
ATC 110 and ATC 185s = almost identical lighting systems.
If you're going to experiment, use the Moose regulator - it will keep you from blowing bulbs while you figure out what you're doing.
At The Back Of The Pack
Arm chair racerFirst time rider
Still been working at it. It just takes some time and I don't have much available. Mock up is complete other than some finish welding once its all torn down. CHeck it out
Power User
4 Wheels? Huh?
Nice build so far. I know some of the guys on here have "Kreemed" the inside of the plastic tank before painting it and I think they had good results.
Keep on Triking!!!! "I am the NIGHT RIDER!!!"
RIP Ninja!
Feedback thread: http://www.3wheelerworld.com/showthr...-for-thestud25
Trike Fest 2011, 2012 Vet!
Founding member of the Haspin 6ft Bats Club!!
Trikes Currently Owned:
87 Big Red 250es
86 Kawasak KLT110. All documentation, bought from original owner.
83 Honda 200s
81 Honda Atc 70
(4) Suzuki ALT 50's
Yamaha YT 60
At The Back Of The Pack
Arm chair racerFirst time rider
Yeah I've heard that works also. Thats still up in the air. THe tank once sanded happens to be almost the exact color of the seat cover and front fork boots. SO I might just add some graphics......not sure yet. Thanks for the advice.
At The Back Of The Pack
Arm chair racerFirst time rider
So I got the frame painted and the powdercoating done in my oven at home. Couldn't get my front tire off the usual way so improvised. LOL Sorry if there are some greeny weeny in attendance.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Reply With Quote
