Results 1 to 3 of 3

Thread: My piston from my 86 r cylinder

  1. #1
    Join Date
    May 2010
    Location
    Ripon, Wisconsin, United States
    --
    861

    My piston from my 86 r cylinder

    This is a 66mm piston from my 86 R. I put on a honest 2000 miles which is about 80 gallons of gas half the time mixed 40-1 and the other half 32-1 and ran a fmf pipe during them miles. Had low comp 145 psi and alot of piston slap. I bought this thing in april of 2010 from the original owner. It did have a fiber head gasket in it but not sure if the piston or rings have ever been replaced. I was shocked at the condition of the pison and the cylinder. The previous owner said he always ran klots for a long time and I ran R-50 too.
    Attached Thumbnails Attached Thumbnails DSCF6346.jpg  
    ]1986 ATC 330R
    1985 ATC 250R vintage PSI racing ported motor
    Get your replacement ATC 250R decals and custom Big Bore #'s here http://shop.3wheelerworld.com/catego...=2&pagegroup=1

  2. #2
    Join Date
    Jul 2010
    Location
    ontario
    --
    1,131
    this is what happen when you run a good oil and the right mixture of gas an oil.
    HONDA WITH A WING AND A PRAYER
    1984 110 project
    1984 125 parts bike
    1983 honda 200x
    19 85x2honda 200x
    1985 honda 250sx
    1985 honda 250es
    polaris p3 should be a parts bike ***gas tank wanted**

  3. #3
    Join Date
    Jun 2010
    Location
    House Springs MO
    --
    5,496
    Wait, wait, wait. I thought 2-strokes have to be rebuilt every 5 hours? /sarcasm

//ArrowChat Integreation Code //