Hey, questions about a 10 inch rim for a atc250r (1984)

[atc250r2stoker]

Hey, Im new to this site and i was just wondering if you guys could give me some advice on rims. Im looking for a 10inch rim for my front wheel, but i need to know some stuff like if i go with a 10x5 rim would that still fit the same tires as a 10x6 or a 10x8 ? If so which rims would be the best for a 1984 atc250r and ill be running ITP holeshot xc tires 22x7-10 or maybe a 23x7-10 holeshot xct cause i went to 18x10-8 holeshot sx's on the back and the stock tire is kinda big on the atc250r. Any advice would help help out a ton, Thank you! also what would be the offset i would want to go with? say if i was to get rear rims for it as well as front rims

[250rmanfmf]

you are going to have trouble finding a 10 inch rim to work. As your offset is like 3/3. Xowner has some 10 inch wheels he sells but not sure on fitment on 83-84 250r's. Kasey I believe said an old LT500 front rim with a 4/166 bolt pattern with a 3/3 offset will work but they are hard to find. Contact Xowner and see if you can figure out if it will work.

[Xowner]

pretty sure 83-84 250r and 350x forks are the same size If you swap over to a 350x set of forks and use the 350x hub You can buy one of th 10 inch wheels i have and be golden i think..... check the fork sizes and if there both leading or trailing