Trikefest 2012 swap meet post em up

[tecat-z]

All of this will be availiable at TF. If you want anything in particular beforehand, let me know and i'll hold it.

Oem grille assy for 84-85 Tecate. Very nice... $20
Partial NOS front rack assy for 83-85 atc 110, atc 125m 84-85. Needs side support bars only, easy to make. $20
Perfect oem shift petal for liquid R. Even includes oem Honda bolt. None nicer. $25
85 Tri-z oem front wheel and tire. Very nice wheel, and tire combo. 60% tire left with no repairs. $50
Pair of Armstrong Turf Tamer tires. 20/11/8. As good as new, and no repair history. Will work great on many machines from atc 110, to 250sx, or even Tri-z or 250R w/ 8' wheels. $50
Pair of Tri-z cylinder cores. Both at 70mm on oem liner. Both have stock port layout. Some cosmetic flaws but otherwise great for B.B. or re-sleeve . $35 ea, or pair for $60.
oem 85 Tri-z plactic combo. Nothing but good rider quality plastics. Great stickers, but all have some flaws. But great way to spruce up a old rider for cheap. $120
84-85 Tecate oem axle. Very clean and ready for use. Was blasted and replated years ago. Straight, great rider quality. $40
85-Tri-z swingarm. All oem w/ no damage or repair history. Would work on 86 too. Needs complete blast, paint, bearings. These can be tough to find in straight shape. $25
Tri-z Rad lock. Perfect condition, like new. Billet alm. $20
Tri-z oem axle jam nuts. Perfect oem locks. $10
84 Tecate Tank. Fair color, and has 84 decal shadows. Tank only. $15

I am having trouble uploading pics, as i have nice ones of everything for sale. I'll get them up soon i hope.

[Xowner]

ED ill take both the Z cylinders at TF. sending pm also

[Bryan Raffa]

Lookin for a DR bottom end .....

[Howdy]

I have a YT175 rolling chassis I do have the motor for it ( motor needs a lot of work ). I don't have pictures of the rolling chassis and parts that came with it yet.

I also have a bunch of other parts from a 175 and a 125 that was retired years ago. I have rear fenders, seats and all the parts in the pictures below.
$150 for everything or Make me an offer.
I will only bring all the stuff to TF if someone is interested in it ( I am running out of room quickly ). I do not want to bring it home!!

[Xowner]

Rear fender has no cracks, has some deeper scratches but no cracks. The seat is pretty nice with a few stains and one hole up in the right front corner. Tank is mint inside and really nice paint but has some chips from shelf life. Some one did a shitty job touching them up.

Guys if your interested in these make offer I have no air cooled R Need them gone. But im not gonna give these away .

[captainweezy]

I have an 86 200x that does run and is a great mosquito fogger. O yes she is a real cutie, especially with that perty rear first gen 250x fender and super charged blue duct taped seat.The brakes are spoken for. The rear tires are spider tracs that are actually more worn out than a crapper on chili day at the VA hospital. Gas tank is damn nice though on the inside and not bad on the outside. Probably the most expensive part on it. I wont be sure if I will have room for this so if you want any parts, let me know. I have a ton to do before TF still so I am not going to be jumping thru hoops to tear the motor apart for a gear, I mean I don't have time to do that AT all! So Hoping somebody needs something simple like those super cool custom headlights I will starting to get the trailer loaded up by Wednesday, and will then know how much room I will have. If someone is interested in the whole thing, please pm me...250r parts lot-how bout $35, tecate fenders-make me your best offer! These will sell, need them gone, Also have 2-3 front fenders as well. 25x13x9 big red tires, big red seat, Huge couple boxes of tecate parts-if any interest, please make me an offer on them all,,,seriously I have no plans with them and no one around this area has Kaws, I may even through in a free t-shirt!

[MIK6]

Hey captain.. will you sell the blue tank scoops off the tank? I understand if you keep them w the tank.
Let me know
MIK6/ Mike

[captainweezy]

Haha yep but they are magically red underneith! Also i got a hair up my booty and started tear down. I will bring any of it to TF including the frame, i got your brakes off first. What all do you need? I have thecomplete assembly

[blue27]

looking for a set of straight 83-84 250r forks, can have blown seals.

[hoosierlogger]

I am looking for a set of rear first gen 200x rims (or the same bolt pattern they can even be 9" rims) with good tires (no balloon tires)

[Itrike]

Headlights set up for a 350x , one flood beam one spot beam. comes with extra bulbs. $90
85 250r RAD dual row carrier, great shape, you should replace the bearings. $35
85-86 250r PRM Baja grab bar only used a couple times, has a few scratches but is still real nice$35
85 350x/250r tool box. The mout toward the lid end is broken around the bolt hole. Still bolts up $10

[Gag_Halfront]

Curt, does the PRM bolt up to a 350x? If so, I'll buy it. Wish I could afford the lights right now. That's a badass rig!

[Tri-ZNate]

I need a set of upper tri-z motor mounts, left 250es front fork and front axle

[keister]

Itrike, please put my name on the toolbox. Thanks!!

[Big Mike]

That headlight setup doesnt tax the electrical system too much does it?