Could the lucky owner(s) upload some good quality photos from this swinger ?
Thank you
At The Back Of The Pack
Arm chair racerFirst time rider
Could the lucky owner(s) upload some good quality photos from this swinger ?
Thank you
Power User
The day begins with 3WW
Get a hold of Broncobeast. I believe he just picked up a 2nd gen with a Westcoast arm on it.
'86 ATC 250R, Build Thread http://www.3wheelerworld.com/showthr...highlight=250r
'86 "Factory Tri racing" Tri-Z http://www.3wheelerworld.com/showthr...b-Top-Tank-ect
Pile of Tecate Parts
My Feedback Thread: http://www.3wheelerworld.com/showthr...edback-for-bkm
Got The Holeshot
Arm chair racerJust too addicted
I've never seen a 2nd generation Westcoast swingarm but I imagine it is similar to my first generation (see pics). The only difference is probably the lower shock mount is offset to the side a bit, otherwise they are interchangeable. I have a 1st generation CAL-FAB on my 87 Tecate and it works, although the strut is at a bit of an angle (see pics).
First Time Rider
Arm chair racerNew to the board
There's a t3 on ebay right now with a westcoast. But it has a weird rear shock setup
At The Back Of The Pack
Arm chair racerAt the back of the pack
Saw that shock set up. That was interesting.
Just Too Addicted
Arm chair racerJust too addicted
1st and second gen are not very similar. First Gen looks like above, second gen is tapered and resembles the 250r models
nstyle73
"When in doubt, wind it out"
Feedback: http://www.3wheelerworld.com/showthr...k-for-nstyle73
Got The Holeshot
Arm chair racerJust too addicted
Wow, never seen the second generation Westcoast swingarm before. The design is a lot different than the first generation. It looks like a modified 250R.
Just Too Addicted
Arm chair racerJust too addicted
Also, the +2's had the filled in plates by the carrier and usually skid plate mounts, while the +4's had the 2 cutouts on each side(like the one in the pic with the blue background)Originally Posted by nstyle73
At The Back Of The Pack
Arm chair racerFirst time rider
I am asking because i was ready to place a bid on ebay for a kawasaki tecate with a lot of goodies. The only problem seemed to be that the swinger was really in bad condition. Other than that it had Motoplat ignition,durablue axle,nice pipe,oem plastics and 3sets or rims/tires.There was just one bid for 2000$. Do you thing it was a worth price? Maybe i should bid on? What do you think Tecate guys?
At The Back Of The Pack
Arm chair racerFirst time rider
Got The Holeshot
Arm chair racerJust too addicted
To bad he welded another shock mount on a rare Westcoast swingarm. If you get it hopefully the damage can be undone.
Reply With Quote