Bushings for 84R

[Blizzard420]

Anybody still making sets of bushings for a 83/84R? In dire need of a set.

[onformula1]

Which bushings do you need?

[toki]

if no one chimes in... and you can wait a little bit. I have some UHMW stock thats been sitting around for a while for the purpose of making swingarm bushings for my 83 250r.

I have a lathe
I have UHMW stock
I have an 83 250r

I do not have time tho lol. I have to replace the rear bearings now so while i have the carrier out I might as well pull the whole ass off and make the bushings... but that could be a week or 3. I'm getting married in august so time is not easy to come by

[Blizzard420]

@ onformula1- The pivot point bushings, I need all 4. Took my swing-arm apart the other night and noticed that it had none, just a bearing and the collar the swing-arm bolt goes thru.

@ toki- Seems like finding parts for these Airfoolers can be a challenge at times.... I'm always waiting for something... Few weeks is not a problem if somebody comes up with a set before hand I will still buy a set from you. Nice to have extra's.

Thanks Guys

[Jmoozy27]

BKM makes and sells them. PM him.

[bkm]

BKM makes and sells them. PM him.

Thank you for thinking of me. I've never made a set for the 83-84 250r and would need some measurements to do so. I have nothing to go off of for that model.

[Blizzard420]

Lets see if this works?

[Blizzard420]

If anybody has a set laying around they can measure to confirm what I posted above that would be Golden..... Thanks

[bkm]

If you would like a set I could ma ke them no problem based off those measurements. I have to order material and you're looking at $40 shipped. If you're interested I'll get some material ordered.

Sent from my SCH-I535 using Tapatalk

[Blizzard420]

I would very much like a set but I would like someone to confirm those measurements first. That little diagram was pulled from Airfoolers.com, so a little unsure of the accuracy. Pm me details for payment bkm. And thank you!!