Results 1 to 6 of 6

Thread: 1985 250SX ID these parts?

  1. #1
    MPDano's Avatar
    MPDano is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Sep 2014
    Location
    United States
    --
    307

    1985 250SX ID these parts?

    Guys,

    Not sure where this goes, but it was in my bucket of parts that came with the trike.

    Also, on the 2nd pic, where does this air line hook up to? It's coming from the rear diff.

    The 3rd pic, what are you guys using for the air hose that goes from the air filter to the frame?

    Click image for larger version. 

Name:	20161030_152734.jpg 
Views:	24 
Size:	1.25 MB 
ID:	236417

    Click image for larger version. 

Name:	20161030_154724.jpg 
Views:	28 
Size:	1.55 MB 
ID:	236418

    Click image for larger version. 

Name:	20161030_153717.jpg 
Views:	27 
Size:	1.90 MB 
ID:	236419

  2. #2
    fabiodriven's Avatar
    fabiodriven is offline Aspiring romance novel cover model, and the Official 3WW slayer of thieves and swindlers. Catch me if you can
    Join Date
    Jun 2008
    Location
    The woods
    --
    10,516
    First picture is rear fender supports.

    Air line from rear end is a vent. Put it somewhere up high where water won't get in.
    85 Tri-Zinger 60
    85 ATC250SX
    86 ATC250SX
    87 ATC250SX
    02 XR650L conversion
    84 ATC 480R

  3. #3
    Join Date
    Dec 2014
    Location
    Lexington, KY
    --
    117
    First picture looks like fender supports. Second picture I'm not sure I think it just routes up high on the fame you might be able to find it in the manual. The last picture there are a couple of them on ebay right now for arround $45.I searched "air box boot". You might be able to take your air box into an auto parts store and ask to look at radiator hoses and find one that'll fit and be flexible enough.


    Looks like Fabio beat me to it.
    Last edited by Hopper055; 10-30-2016 at 08:13 PM.
    1982 ATC185s
    1982 Suspended ATC185s
    1984 ATC70
    1984 ATC 250r
    19?? Motorcraft Three wheeler
    1974 Pacesetter 3
    1984 kawasaki 185
    1977 Atc 90
    1983 ATC 200x

    My suspended ATC185s build thread.
    http://www.3wheelerworld.com/showthr...s-Build-Thread

  4. #4
    Join Date
    Sep 2014
    Location
    Gresham, Oregon
    --
    140
    Yep. 100% positive the first pic are the fender supports. I also just looked at my sx and that breather hose for the rear dif is attached with cable ties and runs up along the frame to under the seat. The missing air intake hose might be a hard part to find so as mentioned above, you will probably have to make use of a radiator hose or similar. I would try to find a thin corrugated rubber hose. The OEM part is pretty thin rubber so you don't need a thick or heavy duty hose. Thinner will be more flexible and easier to deal with.

  5. #5
    MPDano's Avatar
    MPDano is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Sep 2014
    Location
    United States
    --
    307
    Thanks guys. Will see if I can find a pic of the fender supports mounted.

  6. #6
    MPDano's Avatar
    MPDano is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Sep 2014
    Location
    United States
    --
    307
    Found a pic of it mounted. Thanks for steering me in the right direction.

    Click image for larger version. 

Name:	rearfender-supports.JPG 
Views:	10 
Size:	97.8 KB 
ID:	236442

//ArrowChat Integreation Code //