New to the board
Arm chair racerNew to the board
I'm assembling the rear axle on my '83 ATC 200 and depending on which shop manual I look at the number of O-rings in the assemble changes.
Is there an O-ring on both the sprocket and brake side? Totaling 2 O-rings? The Honda shop sold me 2 so I can only assume their exploded view showed one between the sprocket and one between the brake drum. All of the manuals show at least the one on the brake side.
Which is correct?
Lar
Larry
Suffolk, VA
------------------------
1983 ATC 200
New to the board
Arm chair racerNew to the board
anyone know
Larry
Suffolk, VA
------------------------
1983 ATC 200
First Time Rider
Arm chair racerNew to the board
I'm not 100% sure, i'd have to look on my 200e when i get home, but if they're anything similar to ones i've seen there's only one, between the brake drum housing and the two big brake drum bolts.....i could be wrong though. I took apart my 125m last week for new rear seals and it only had one.
Power User
The day begins with 3WW
Service Honda shows two O-rings on the brake side (22)
http://www.xtremeusa.com/fiche_secti...1983&fveh=2795
I don't see one on the chain side
http://www.xtremeusa.com/fiche_secti...1983&fveh=2795
Reply With Quote