Results 1 to 7 of 7

Thread: 200x engine mounts

  1. 05-09-2009, 08:37 PM #1
    techmaster330
    techmaster330 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jul 2008
    Location
    Cochranton Pennsylvania
    --
    161

    200x engine mounts

    I'm having a hell of a time getting them out and I really don't wanna strip them. Any advice?
    Reply With Quote Reply With Quote
  2. 05-09-2009, 08:45 PM #2
    harryredtrike's Avatar
    harryredtrike
    harryredtrike is offline Power User Got the holeshot
    Join Date
    Feb 2009
    Location
    michigan
    --
    2,387

    stuck engine mounts

    tip your trike up on an angle on two wheels.then put pb blaster on and soak over night.squirt several times then tomorrow you should be able to knock out with wood and a
    1985 ATC 250R
    . Team Red Trike
    Reply With Quote Reply With Quote
  3. 05-09-2009, 09:52 PM #3
    mahackney42
    mahackney42 is offline New to the board Arm chair racerNew to the board
    Join Date
    Dec 2008
    Location
    West Virginia
    --
    43
    After a good soaking with PB Blaster or Liquid Wrench, if they STILL won't budge, you can always use a little heat. A small propane torch will be enough. Heat the nut up slightly to expand it and break the rust bond. Be careful you don't burn anything you don't want burned. Obviously don't do this anywhere near the gas tank, even if it's empty.
    Reply With Quote Reply With Quote
  4. 05-10-2009, 05:51 PM #4
    The Goat's Avatar
    The Goat
    The Goat is offline Power User 4 Wheels? Huh?
    Join Date
    Oct 2007
    Location
    Grosse Tete, LA
    --
    3,441
    guys I should point out the bolts prolly aren't rusted on... it's just the fact I outweigh the gent who bought the bike by 200 pounds or so. lol and I torqued the bolts in accordance with my size.

    heave! they'll come off.

    I still have a rubbermaid container of extra 200x crap to ship you. it'll head that way when I get everything seperated out of the spare bedroom and the shop
    Reply With Quote Reply With Quote
  5. 05-10-2009, 06:40 PM #5
    MonroeMike's Avatar
    MonroeMike
    MonroeMike is offline Power User The day begins with 3WW
    Join Date
    Dec 2008
    Location
    Monroe MI
    --
    5,787
    ^ Funny
    Owner's Manuals
    Yamaha
    Honda

    Condensed Service Data

    Yamaha serial/VIN numbers

    Honda Engine Serial Numbers

    Manual Repository

    Reply With Quote Reply With Quote
  6. 05-10-2009, 08:24 PM #6
    techmaster330
    techmaster330 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jul 2008
    Location
    Cochranton Pennsylvania
    --
    161
    Haha they came out Goat, just had to put a 2 foot long pvc pipe on the end of my wrench for a little extra leverage. I hate being small...
    Reply With Quote Reply With Quote
  7. 05-10-2009, 08:42 PM #7
    outtaline
    outtaline is offline My keyboard has no punctuation keys Arm chair racerJust too addicted
    Join Date
    Feb 2009
    Location
    South Florida
    --
    531

    lighter

    in a race 10lbs is good for 1 h.p. ina drag race so imo lighter is faster and if your close to my size that thing should rip
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //