Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 41

Thread: Trikefest Dammage Report's

  1. #1
    Join Date
    Jan 2006
    Location
    conesus lake NY
    --
    11,894
    Blog Entries
    1

    Trikefest Dammage Report's

    Thursday smoked a water pump on the trail bike,, waited till Thursday night when ran into Eric got a new water pump,, and was back in action Fri morning..

    Saturday . the MX bike took some abuse ,as many that heard my bike..sounded like it was gonna blow in the main two stroke class..I did Finnish but missed the BTC main..

    one Finger broke off the basket,and was grinding on my cover ..Thats what the noise was! , found another barnett spring broke also..thats like the 4 one..witch I'm about..It actually pushed the cover off (and I thought to myself..that was the easyest thats ever come off!) already got the new boss in and just gotta put the cover on,, rear number plate was smashed more, and my rear bumper was also bent and broke..whoever hit me ..hit me hard! probley that BTC class!.

    4" spacers also going on for Smith Road.. see ya ladies there
    Attached Thumbnails Attached Thumbnails 2009_0823dammageTF0004.JPG   2009_0823dammageTF0005.JPG   2009_0823dammageTF0006.JPG   2009_0823dammageTF0003.JPG   2009_0823dammageTF0008.JPG   2009_0823dammageTF0009.JPG  


  2. #2
    Join Date
    Jan 2006
    Location
    conesus lake NY
    --
    11,894
    Blog Entries
    1
    I know there was a LOT OF dammage so lets hear it!

    Yes I'm RUFF ON EVERYTHING!

    left leg ....Right leg.... pipe burn on each leg,, and tire burns on the back of each.. I never ride that zinger again.. that thing dont like me for modding it out...
    Attached Thumbnails Attached Thumbnails 2009_0823dammageTF0001.JPG   2009_0823dammageTF0002.JPG   2009_0823dammageTF0010.JPG   2009_0823dammageTF0011.JPG   2009_0823dammageTF0012.JPG  

  3. #3
    Mosh is offline I'm the one with all the 2 stroke around here! The day begins with 3WW
    Join Date
    Jun 2005
    Location
    na
    --
    5,702
    Broke a 70 throttle cable, and spilled a half beer.
    And I seem to have lost my pants?
    Here is where my long useless list of stuff nobody cares about should go...


    Proudly NOT a member of

    "Team on the Teat"

  4. #4
    Join Date
    Feb 2004
    Location
    Tionesta, PA
    --
    5,743
    Not too bad considering what happened - my 450 grab bar was sheared off by a flying 450 Yamaha. Also buggered up my fender bracket and pulled the bosses out of the sub-frame where they mounted. Also when my chain came off - not only did it break a tooth off the front sprocket - but it also actually cracked a link in the chain. Extra special thanks to Jason Hall who wrenched on it and had to remove the swinger arm bolt to get the chain out. He also had parts on hand to have me back on the track for the main event. Thanks to Corey Sprock for having a chain on hand.

    Other than that - everything else seems to have worked out pretty well.
    RIP - Yamahondaman!! You will never be forgotten!
    RIP - Sam Brehm!! Gone but NEVER forgotten!
    RIP - Sandpuppi101 - You will live on in my mind - I miss you friend!

  5. #5
    Join Date
    Jan 2005
    Location
    RI
    --
    2,530
    raffa what basket broke a finger off? oem or aftermarket?
    1986 Tri-z
    1985 250r
    1985 200s
    1985 70[/SIZE]

  6. #6
    Mosh is offline I'm the one with all the 2 stroke around here! The day begins with 3WW
    Join Date
    Jun 2005
    Location
    na
    --
    5,702
    Pretty sure he broke a clutch boss bolt in the center hub.Not the basket fingers.

    Bryan with that first rubbing problem, and the constant broken springs, I have to wonder if something deeper is going on with your mainshaft or bearings.
    Here is where my long useless list of stuff nobody cares about should go...


    Proudly NOT a member of

    "Team on the Teat"

  7. #7
    Join Date
    Jan 2005
    Location
    RI
    --
    2,530
    thats what i thought but i was confused cause raffa usually doesnt get his terminology screwed up...
    1986 Tri-z
    1985 250r
    1985 200s
    1985 70[/SIZE]

  8. #8
    xrider is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Oct 2006
    Location
    Wapakoneta
    --
    815
    My 200x took a beating in the motocross... Bent my handlebars, bent both footpegs down, both fork seals are leaking, and shattered my rear bearings.

  9. #9
    Join Date
    Jan 2006
    Location
    conesus lake NY
    --
    11,894
    Blog Entries
    1
    Quote Originally Posted by DeePa View Post
    raffa what basket broke a finger off? oem or aftermarket?
    not the basket.... the clutch boss.. where the bolt for the spring's go!


    Quote Originally Posted by Mosh View Post
    Pretty sure he broke a clutch boss bolt in the center hub.Not the basket fingers.

    Bryan with that first rubbing problem, and the constant broken springs, I have to wonder if something deeper is going on with your mainshaft or bearings.
    I took everything off and theres no play ,,only a little(in & out) thats normal..so I put it all back together.. 30 year old boss dont help with a sprock basket..almost need cory to make a boss and updated pressure plate

    Quote Originally Posted by xrider View Post
    My 200x took a beating in the motocross... Bent my handlebars, bent both footpegs down, both fork seals are leaking, and shattered my rear bearings.

    and had fun didn't ya......
    Last edited by Bryan Raffa; 06-30-2009 at 01:44 PM.

  10. #10
    Join Date
    Jan 2003
    Location
    Cincinnati, OH
    --
    3,289
    raffa u fix that fuel line?
    An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................

    GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    "MR.Clean"

    New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412

  11. #11
    Join Date
    Mar 2007
    Location
    Texas
    --
    5,045
    dammmit!! i missed it!!!!!
    ________________
    I'm just a squirrel "Trying" to get a nut!

    Nearly every kind of Honda ATC (plus some custom ones
    several Yami Quads (mostly custom built for MX racing)

    https://www.mikesatvfix.com

    "Freedom is not free...but the U.S. Marine Corps will pay most of your share."

  12. #12
    Join Date
    Jan 2006
    Location
    conesus lake NY
    --
    11,894
    Blog Entries
    1
    Quote Originally Posted by Xowner View Post
    raffa u fix that fuel line?
    oh now you wanna fess up do ya ... what fuel line??? the one you pulled off my fuel pump on my trail bike....

  13. #13
    Join Date
    Jan 2003
    Location
    Cincinnati, OH
    --
    3,289
    Quote Originally Posted by Bryan Raffa View Post
    oh now you wanna fess up do ya ... what fuel line??? the one you pulled off my fuel pump on my trail bike....
    nope cant take the credit for that one! mike told me about last night in the chat! LOL said u looked good pushing it back up the hill! LOL
    An F-16 turned the after burners on and banked HARD over my house, I ran outside grabbed my Bud Light and Yelled as loud as I could................

    GIT IT RAG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    "MR.Clean"

    New 10 inch wheel buy http://www.3wheelerworld.com/showthr...12#post1258412

  14. #14
    xrider is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Oct 2006
    Location
    Wapakoneta
    --
    815
    Had loads of fun, can't wait til next year! Winning the mid size suspended race eased the pain too, lol.

  15. #15
    kiser's Avatar
    kiser is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Dec 2008
    Location
    Coshocton Ohio
    --
    525
    I had a brake cable snap on my BIG RED while daddio was riddin it. He wanted to pay for it but i told thats just one of those things that happen. Also broke a chain on my 70. I guess a stock chain dont like a 140cc motor. Got it fixed so i could rag on it the rest of the weekend. I had a blast and cant wait till next year.

//ArrowChat Integreation Code //