I have a 1980 Honda atc 110 and it does not run. It has compression but no spark. Where do I start? Any tips and instructions? I have cleaned the carb and thats about it cause I don't really know anything about the electrical. Please help thanks!
Registered User
New to the board
I have a 1980 Honda atc 110 and it does not run. It has compression but no spark. Where do I start? Any tips and instructions? I have cleaned the carb and thats about it cause I don't really know anything about the electrical. Please help thanks!
Power User
The day begins with 3WW
Replace the points .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Registered User
New to the board
How much do they cost and where could i get some?
New to the board
Arm chair racerNew to the board
Check ebay. usually parts on there pretty cheap
Registered User
New to the board
Is this only thing needed?
http://www.ebay.com/itm/Honda-ATC-11...f18de5&vxp=mtr
How hard are they to replace, and do they need to be timed or something?
Power User
The day begins with 3WW
http://www.dratv.com/noname93.htmlOriginally Posted by Xman98
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Registered User
New to the board
So Im going to buy the contact point, how hard is that to put on?
At The Back Of The Pack
Arm chair racerFirst time rider
More Minnesotans? Where ya from?
Life is short, Party naked!
1986 250r
1984 200s
1984 250r
1970 us90
1991 Yamaha Blaster
1984 110
1985 110
1984 200x
Power User
4 Wheels? Huh?
Its not that hard to replace, unscrew it and remove it, take the wire off and then reassemble with the new set of points. Then you just set the gap on the points with a feeler gauge and your good to go. All the info is in the service manual, check the link below in my signature to go to my manuals website and grab a copy.
Fellow Minnesotan here as well!
---------------------------------------------------------
1984 Honda ATC200ES "Big Red"
1982 ATC200E "Hondie"
1988 TRX300FW "Project Quad" Still in progress....
Reply With Quote